Search results

I have a 16in Kirkey 20* layback seat with pad $100 also come with custom fit mount.

I have a complete 350ci bomber motor w/500 cfm Rochester, 313 intake, 882 heads with race flow 194/150 manley valves,3 angle valve job, and fully balanced stock crank and rods w/flat top pistons $1000 w/10.5" light weight GM flywheel $900 w/out (618)604-6310 Bill

I have 168 w/repaired ear $75 175 or 168 perfect shape $100 each

I have 168 w/repaired ear $75 175 or 168 perfect condition $100 each

I have the window net,gas pedal (firewall mount), 2 lever shifter and a three gauge panel with lights water temp (works) oil pressure(works) oil temp (does not work) $80 for all

I have an Edelbrock intake and carb if it doesn't have to be a Holley.

What kind of trades, I have 350 blocks and heads, three speed trans saginaw 168 and muncie 175 2nd gear, 22 gal Jaz fuel cell used 1 season, 15" Kirkey seat with pad, 4 3/4 and 5 on 5 wheels. I would like to know what back spacing they are. I have a toyota with manual hubs and would have to...

2 virgin pre '75 2 bolt blocks $100 apeice. but youve already been offered that and i won't go cheaper.

complete 350 w/882 heads and 500 rochester about 12 races on engine. $800 engine and trans complete w/15# GM flywheel $1000

I have most everything you would need. Complete drive train which would include everything on the motor except the air cleaner and power steering pump (it's for the non metric cars the lines are different)Light weight GM flywheel 10.5" Steel bell house would include the S10 slave cylinder and...

If you ask for a phone number at least you could call. What the h e l l is up with that?

cell # is 618-604-6310

I have one that is from a '71 Cutlas complete $150

I have a set of 882's with Manley race flow valves and Z28 springs $200.

Martinsville is 11 degrees, Bristol is 36 degrees and Tri city sure didn't look like Martinsville to me when we stoped by. It does look like it's going to be fast.Good luck with the new cofiguration.

Seems to me, if you wanted people to come out for the last races of the season, you should probably not charge them $15 and $18 respectively to come out and sit in uncomfortable cold weather. I would have liked to seen both nights but not at that price.

355 Mid West Motorsports short block/ 882 heads/313 intake/500 cfm rochester $1000

I have a 90 Mustang LX and a set of Center Line wheels for it. It has new tires on the stock rims right now.$800 runs and drives

Just so you know, the wife and I could have spent the extra $25 this week to go to a local track, but instead decided to save it towards going to the Silver Crown race at the State Fair in Springfield. With that decision also came the chance to watch Team Demolition from Joliet (taped) and the...

As a spectator I got to see a very good Midget feature (that alone was worth the price of admission) dam good thing too. The Micros put on a decent show. The Bombers, well let's see 4 restarts before you got a lap in and over half the field was gone by the time you got that one single lap...