terrellracing
New Member
I have a 360 CI SBC motor for sale.
I built this motor to run as a B-Mod, but it could be used in other classes as well. This motor is ready to drop in and go. only thing it will need is a fuel pump.
It is a .060 over bore chevy block. the block has been decked, line bored, lifter valley has been polished, and has lifter valley vents.
It has a 44 lb., 3.48 stroke, Nitrated forged crank, 6" H-beam floated rods, KB Hyper pistons, speed pro rings, clevite H-Series rod and main bearings, new cam bearings,
big block oil pump and pickup, champ 7 qt pan, new 9 degree adjustable timing chain, aluminum timing cover, new high flow aluminum water pump, new 6 3/4" harmonic
balancer, new aluminum 25% reduction pulleys, 4 blade 15" high flow fan.
Heads are World Product Sportsman 2's, that have been milled to 50CC's, Stainless Steel valves, scorpion 7/16 aluminum roller rocker arms, 1.437 springs, straight plugs,
Edelbrock performer intake, holley 4412 2-barrel carb, new HEI distributer.
Cam is a Howards custom grind 2-barrel cam, with a 4-7 swap. will get specs later.
does not come with a fuel pump. that is the only thing that is missing.
This motor only has break in time and about 15 laps on it. nothing wrong with motor at all. just needing to sell.
can get pics if interested.
$4700 OBO.
I built this motor to run as a B-Mod, but it could be used in other classes as well. This motor is ready to drop in and go. only thing it will need is a fuel pump.
It is a .060 over bore chevy block. the block has been decked, line bored, lifter valley has been polished, and has lifter valley vents.
It has a 44 lb., 3.48 stroke, Nitrated forged crank, 6" H-beam floated rods, KB Hyper pistons, speed pro rings, clevite H-Series rod and main bearings, new cam bearings,
big block oil pump and pickup, champ 7 qt pan, new 9 degree adjustable timing chain, aluminum timing cover, new high flow aluminum water pump, new 6 3/4" harmonic
balancer, new aluminum 25% reduction pulleys, 4 blade 15" high flow fan.
Heads are World Product Sportsman 2's, that have been milled to 50CC's, Stainless Steel valves, scorpion 7/16 aluminum roller rocker arms, 1.437 springs, straight plugs,
Edelbrock performer intake, holley 4412 2-barrel carb, new HEI distributer.
Cam is a Howards custom grind 2-barrel cam, with a 4-7 swap. will get specs later.
does not come with a fuel pump. that is the only thing that is missing.
This motor only has break in time and about 15 laps on it. nothing wrong with motor at all. just needing to sell.
can get pics if interested.
$4700 OBO.
