Anyone interested? (mini stocks)

Badfast_3

Badfast_3

Moore MotorSports
come on people.... fwd can run with us to......

HOW MANY PEOPLE WOULD BE INTERESTED IS RACING ONE FRIDAY NIGHT @ MIDWAY SPEEDWAY IN LEBANON,MO ITS A AWSOME TRACK I NEED TO KNOW HOW MANY PEOPLE WOULD COME AND RACE... ONE OF THE TRACK OWNERS TOLD ME THAT THEY WOULD RUN MINIS IF WE HAD A GOOD CAR COUNT PLZ LET ME KNOW ASAP THANX TONY M.:confused:
 
rules

if the rules don't say you can do it...don't.

All cars are subject to officials approval.

*body- american or foreign made rear wheel drive, front engine, sedan, or station wagon. Station wagon must have side
windows out. Motor & transmission must remain stock and in stock location. Engine must match car (ford to ford, gm to
gm, etc.). No pickups!

*engines- 4 cylinder single cam engine only. Starter and clutch must be operational. Headers allowed. 2500 cc maximum size
engine. No aftermarket racing heads allowed. Aluminum heads allowed only on original makes & models of cars. Porting
or polishing ok. 40 overbore ok, but must not pump more than 2540 cc.

*carburetion- max 500 cfm, 2bbl -no fuel injection. Aftermarket intake allowed. Gas only.

*suspension- must remain stock. Weight jacks allowed. Non-adjustable pullbars allowed. No traction devices of any kind.

*shocks- 0ne shock per wheel. No coilovers. Racing shocks & springs allowed. Must be in stock location. No adjustable
struts on front.

*rear ends- can be locked. Must remain in stock location for car. (eiri). Passenger car rear ends only. No ratchet rear
ends allowed.

*brakes- all four wheels must be totally operational & stock. Must have stock master cylinder and pedal in stock
location.

*bodies- all cars must have full floor boards and full fire wall. All holes must be sealed with aluminum or sheet metal.
No bars will be allowed outside the car or on the frame to act as nerfing bars. All glass & mirrors must be removed.
Doors, hood, & deck lid must be securely fastened & a screen & bars in front of the driver.

*wheels- steel wheels only, 8” maximum width.

*tires- any tires allowed that fit in the tire hoop. Grooving is allowed. 8”.

*spoilers- any type. No side boards. Height limit of 8”.

*frames- must be stock for make & model of car & x'd outside underneath drive shaft. Tube frames are allowed.

*weight- must weigh 2200 lbs., with driver, after race.

*roll cages- a full perimeter four post roll cage with an x-brace in rear & rear kickers must be used. Roll bar padding
recommended in drivers compartment. Roll cage must be securely welded to frame or to uni-body. Must have minimum of
one cross bar in top halo of roll cage. Minimum .095 tubing at least 1.5 outside diameter for cage and door bars. 3
horizontal door bars on driver's side are mandatory. Minimum of 3 uprights tied from bottom to top door bar on driver
side. Absolutely no square tubing or galvanized pipe allowed. Fuel cell protection bar may be used, mounted frame rail
to frame rail, no higher than the fuel cell & inside the trunk area. Maximum 1.75” pipe.

*bumpers- stock type, square, or round tubing with ends capped. Width of bumper not to exceed past the center of rear
tires unless stock bumper is used.

*safety- driver must wear approved seat belts & shoulder harness. (3” x 5 point must be installed with a minimum of 7/16”
grade 5 bolts w/ lock nuts.) all drivers must wear a sfi approved driving suit (top & bottom) and safety helmet.

*sa-95 rating helmet recommended. Fire extinguisher required and must be in easy reach for the driver.

*seat- must have approved racing seat. Must be mounted with fender washers and a minimum 4-3/8” grade 5 bolts. Aluminum
seat recommended.

*fuel tank- must be of heavy gauge material & securely mounted out of the drivers compartment.

*fuel pumps- if engine is equipped for mechanical pump it must be used.

*electric pumps- must have oil pressure shut off.

*gasoline- gas only. No alcohol. No additives. Racing fuel okay.

For more-information:

Visit www.lebanonmidwayspeedway.com or call 417-588-4430- harold armstrong.

Midway speedway is located on hwy. 32 east 5 miles to hwy. B. Turn right and go 1/2 mile, located on the right.
 
...............

:confused::confused::confused::confused::confused::confused::confused::confused:btt. ...........................................................................................
 
call me

tony would you call me i saw something down at lebanon 4 sale thought you might know guy num or something where i can contact him my num is 314-574-8934 thks tom
 
No offense, but.... The rules listed above probably eliminate more than 95% of the ministocks in this area.

Not to mention the rules contradict themselves.

Shocks can't be in stock location if you're running weight jacks. You CAN run weight jacks and a pull bar, but can't run adjustable struts?

Stock motor, but it can be punched .040 and ported and polished...

Stock frame for make and model, but you're allowed to run a tube frame...

And you CAN run a station wagon, but CAN'T run a pickup...

Someone put together some weird rules...

Again, no offense meant...And good luck with your quest but your rules have eliminated most everyone I know.
 
?

dirtsurfer said:
no offense, but.... The rules listed above probably eliminate more than 95% of the ministocks in this area.

Not to mention the rules contradict themselves.

Shocks can't be in stock location if you're running weight jacks. You can run weight jacks and a pull bar, but can't run adjustable struts?

Stock motor, but it can be punched .040 and ported and polished...

Stock frame for make and model, but you're allowed to run a tube frame...

And you can run a station wagon, but can't run a pickup...

Someone put together some weird rules...

Again, no offense meant...and good luck with your quest but your rules have eliminated most everyone i know.
Click to expand...




to dirtsurfer

first of all the rules are not in stone! 2nd this is a once a yr thing so i dnt think it would matter alot! THIS WAS JUST A SIMPLE REQUEST FOR RULES THAT "WAS" THE OLD ONES FROM 3 YRS AGO
 
tmoore20 said:
to dirtsurfer

first of all the rules are not in stone! 2nd this is a once a yr thing so i dnt think it would matter alot! THIS WAS JUST A SIMPLE REQUEST FOR RULES THAT "WAS" THE OLD ONES FROM 3 YRS AGO
Click to expand...

If it wouldn't matter, then POST THAT instead of a set of rules that starts with "if the rules don't say you can do it...don't", and don't conform to our cars/trucks...:confused:

Upsidedown posted a request for "WHAT RULES" the race would be under. I read the rules, thinking that it could be a possibility to go and run this race. However, the listed rules are nowhere near what we run. Way too restrictive on the chassis, nerfs and etc. But yet, more open on the engine.

Sorry if I ruffled your feathers. I wasn't trying to piss on your parade., I was just commenting on some strange/different rules...
 
You must log in or register to reply here.




Back
Top