Big Parts List ****************

SCP

Active Member



All parts located in High Ridge, Mo at SCP. Call 636-677-1320 (days) 636-795-1810 (cell) or 314-374-5660 (cell) . These are “cash & carry” prices!

-2 NEW chrome Bassett wheels, beadlock, 8-¾” wide, IMCA/USRA/UMP legal (1) 2” offset, (1) 3” offset, 5x5 bolt pattern, $135 per wheel

- SOLD**Complete Set of (4) used 7200 series Advanced gas shocks, complete with dyno sheets, (2) 9” shocks and (2) 7” shocks, ready to bolt on, $450 for complete set

-2 driveshafts, 29” Southwest Speed with long slip -yoke $90 and u-joints and a SOLD PEM 32.5” without yoke, just u-joints, $60.

-7.5” flat black Simpson Voyager Evolution helmet with fresh air supply inlet and HANS device tabs, worn very little, $300.

-Quick Change aluminum pinion plate, with spacer and bolt, good usable condition, $55.

-Pair of Wehrs ball bearing steel birdcages with shock plates that have a built in level, complete with hardware and ring clamps, great shape, $275 for the pair.

-Bert transmission steel Chevy coupler with HTD drive & 3 flywheels, $100.

-Kirkey 00100 right side head support, great shape, $10.

-SOLD Left and right side Pinto spindle hybrid rotor caliper brackets, $20 for the pair

-Keyser ball bearing brake floater, used very little, $75.

-Dominator air cleaner hood scoop, 1.5”, $20.

-Two 4-blade 17.5” cooling fans, $30.

-NEW Erson Cams double roller timing chain for Big Block Chevy, $20.

3 KSE Tandem power steering/fuel pumps, all are like new & come with HTD pulleys:
- SOLD (2) old style pumps, $375 per pump.
- SOLD(1) new style, $475.

-SOLD 2 Barry Grant fuel pressure by-pass systems, great shape with -8 fittings, $50 per regulator

-3 used Edelbrock intake manifolds, all in good usable shape:
-SOLD Super Victor, $150
-Victor Junior, $125
-Torker II, $100

-Schoenfeld 1186 modified headers, good shape, no bent/cracked tubes, 1.75” tubes, the collectors are 3.5” x 8”. They fit Impressive, BMS, Dirtworks, Hoffman, Jet, KMOD, Bob Pierce, Sardeson, Smiley's, and Victory, $100.

-Schoenfeld 1176 modified headers, they are dirty, need to be blasted/painted to look new again, usable. They fit BMS, Bob Pierce, Dirtworks, Harris, Hoffman, Hot, Hughes, Jet, Larry Shaw, Lightning, Lou Fegers, M&M, Pro, and Sardeson. $75

--+3 stock Chevelle lower control arms, all straight:
-left side, black, with ball joint, shock mount, and bushings, $45.
-Left side, chrome, with bushings and shock mount, $50.
-Right side, bead blasted, no ball joint, shock mount, or bushings $45.

-Like New Sweet collapsible steering column, 22”-32”, with steering wheel quick release coupler, like new condition, $200

-Complete MSD System: MSD Slip Collar Pro Billet 85561 Distributor with new bronze gear, cap & rotor. MSD 6425 Digital 6AL box with new wiring harness. HVC II 8253 blaster coil. All parts are near new. Three pieces sell for $740. $450 takes all.

-Custom Race Carburetor, like new condition, 4150 style, 950 cfm GAS, annular boosters. Sells new for $1300. Bought 2 of these carbs going to sell 1. $900

-Morgan Gas Carb, 950 cfm, billet base & metering blocks, excellent carb. Sell new for $1300 will take $750.

-(2) 13” Outpace greasable swedged tubes with chromoly rod ends, used very little. $45 for the pair

-Left front Rocket by Ruhlman upper control arm, Chevelle stub. $20

-SOLD**Dandy Bar torque absorber/pull bar, used very little, still in like new condition. $100


-(8) Dyers 6.125” SBC H-Beam rods. $550.

-Bryant 4”stroke 400 main crankshaft out of Pro Power late model motor.$650.

-B&B SBC rolled head aluminum valve cover with spring oilers for late model. $275

-SBC cast aluminum valve covers w/no holes or tubes. $45.

- SOLD **Pro Action SBC Aluminum 23dg Raised Runner Head Package. Fully ported heads, fresh valve job & surface ready to assemble. Titanium intake & exhaust valves. HVH/Edelbrock ported manifold. Jesel shaft rockers. ARP head studs. These are the BEST 23 degree heads ever made!! $3,000 take all.

-NEW SBC 18 degree 414 Modified Motor. NEW Dart block & heads w/all titanium valves, etc. $16,500








 
Last edited:




Back
Top