IMCA guy's I need some info

S

SMURFBLUE3

FORD PARTS PUSHER
well I did a web search and IMCA does not have 2003 rules on the web what I am needing to see it the sketch of the door plate this is for another class of cars and we are needing this give the drivers something to go by....I know the it supposed to be 18 gauge or .049 inch thickness from the top door bar to the bottom door bar any body got a drawing of this would be greatly appricated thanks smurf
 
I know all I'm wanting is one drawing I don't even know if they have it... it could be one from the 2001-2002 rules just need a guige line to go by thanks
 
Door plate??

Smurf... I put a door plate on a modified a couple years ago.I used 1/8 plate. Just depends on what your safety factor is?

Frank
 
If my memory serves me right the plate had to extend from the top door bar to the bottom door bar,and to a point six inches in front of the front edge of the seat. That is how we did my car . and I believe the minimum tollerence was 18 gage.
 
You must log in or register to reply here.




Back
Top