I have a 05 Mastersbilt round tube car. It has been repaired ahead of the front uprights(a-arm mounts). The lowers are brand new Out-Pace 1 pc lowers with Howe balljoints and the uppers are also Out-Pace and also have Howe balljoints. Car has Sweet aluminum spindles, Out-Pace tie rods, Frankland rearend with Birky brass insert birdcages, Wilwood hubs (fronts are snap cap rears are 8 bolt with new drive flanges), ATL fuel cell, 1 nite old wilwood brake pedal with masters, Birky gas pedal, 1 nite old Shwartz hand clutch, 1 nite old Quick car 4 gauge panel, tel tac II digital tach, Quickcar master disconnect. Car has all new ****pit, deck (bead rolled), and body with 1 nite on it but did have front end accident. I can sell turnkey with a Wissota style 358 aluminum Spec head wet sump engine, ballspline and Open 4 barrel. Call for turnkey pricing. I would possibly trade this for a newer modified name brand chassis (Shaw, Pierce, Harris, GRT, Dirtworks).
Rolling with no rims and tires and Afco shocks for $4500
I have a 2004 Barry Wright roller. Car has not been raced since 2007 and was only ran less than 30 nites from 04 to 07. It has never been stubbed or bent badly. It was assembled at Precision Performance (Eckrich's) and has all there components on it. It has a fresh rearend with new tube and side bell as the tube broke the last nite it was ran and has roller bearring birdcages. ATL 26 gal fuel cell, Out-Pace lowers with Howe balljoints, TWM spindles, TWM uppers with Howe balljoints, wilwood pedals, Auto meter gauges, MSD 6T box with soft touch rev control, on board fire suppresion system, Butler seat, impact belts, Carrera aluminum threaded body shocks. Will sell as listed with no rims or tires for $4250. Would also sell this turnkey call for details.
I have a 2002 Mastersbilt square tube frame. It is in nice shape for its age. Frame is powdercoated black. The decking and body was all new and put on by the guys at Out-Pace last summer and has less than 10 nites on it since new. Car will come with the frame, ****pit , decking, body, fuel cell (32 gal), and the brakelines ran for $750 or with Out-Pace lowers(2pc) with Howe balljoints, uppers with balljoints, sweet aluminum spindles, Out Pace rear 4 bars, Complete rearend with TWM nylon cages, Out Pace liftbar, shifter with bert linkages, aluminum radiator for $2000. All ****pit, decking and body are black in color and car looks very nice as it has a Rocket style interior. I want to sell it ASAP so make me an offer!!
I have 7 Integra non cannister shocks. These are the fixed valving gas pressure only adjustable. They are aluminum coilover threaded body shocks. 2 have just been rebuilt with new shafts by Precision Performance (Andy Eckrich) and the other 5 have one nite since they were rebuilt at Port City. I am selling all my latemodel stuff and thats the reason these are going. I have
75 RF
73-5 RF
75-3 LF with take up spring and slider
73-6 5th coil
95-1 LF ahead
96-2 LR behind has take up spring also
93-5 RR
I have inflation tool and some extras as well. Great condition with only the RF having a small ding in the upper bulb but does not affect it in anyway. These are guaranteed ready to bolt on and run. I have them on car now. Will take $1500 obo for everything.
I have a complete 420 all aluminum engine. It is not assembled at this time.
There is nothing wrong with this the owner just tore it down after the season to re ring and bearring it. The track he was running cut the open latemodels and he never had anything done with it. I recently bought his entire operation and have no use for the engine so thats why I am selling. It has very very low nites on it as it was only ran 1 nite a week since new. It has a Rodeck aluminum block with 350 mains, Oliver billet 6" rods, Lunati 3.875 stroke crank, GM 18* heads with Jesel shaft rockers, titanium valves , PSI springs, Heads and intake have been professionally ported. ATI balancer, MSD distributor with wires, roller cam with Shaver Wesmore gear drive, aluminum dry sump pan, aluminum water pump. This is a complete engine package deal that is undamaged and ready to be cleaned and reassembled. I will take $7500 as it is or $9000 assembled with new bearrings, rings, gaskets, and misc. Make an offer as it need to go.
I am selling a B&B Racing engines "Ace" spec engine. This engine was purchased by me from the original owner in a buyout. I have not ever ran it as I already had my own similar engine. I am selling all my spec and latemodel stuff so this is going. The original owner was a local racer and I seen the engine perform every nite it was ran. It has alot of power. The short block was all new 8 nites ago and the topend had about 12 nites on it before it was transfered to this motor. Motor is set up as a wet sump to fit our local tracks rules and could also be ran in a mod or converted to dry sump for Wissota rules.
Here is the run down on the engine. It has a Callies 3.5 stroke 43 lb Magnum crank, Dyers rods, JE Dome pistons, Canton oil pan with power pouch, GM 350 block with a .030 over bore. The heads are Brodix SPEC SPCH heads and have Crower shaft rockers, Edelbrock Super Victor 2925 intake with cooling lines ran, billet CV alum pulleys, MSD distributor with wires, Stewart water pump. This motor only needs a fuel pump to drop it in and run. I did not get dyno sheets with the engine when purchased but it was dynoed at B&B. I can put this on an engine stand to let potential buyer hear and see it run if needed. Original paid over $6500 just for the short block last July. I will take $5850 obo.
I have 390 (extensively under cover modified). owner had over $3000 invested. This carb is only off 30 hp from an open carb. I will take $750 shipped to your door.
9 Weld XL beadlocks that are all in very nice shape and have the rings in them for covers but no covers. I am not selling these until cars are gone unless I have a buyer for all 9. These are 14" wide with 5" backspacing. No junk, no damage!!! Just scuffs and rock dings from racing. I will take $1850 for all 9 shipped to your door. Don't ask me to split because it will not happen unless cars are sold first!!
I have a Brinn trans that has only 8 nites since rebuilt and I am guaranteeing it to be in perfect condition on arrival. I will take $950 for it.
I have a KSE tandem rear mount pump with Peterson pulley and belt. It came with one of the buyouts and I believe it to be in good working order. $375
I have a helmet blower system. Works perfect. $115
36.5" Aluminum fastshaft. Has 4 nites on it since new. Will take $200
37" Quarter Master aluminum shaft. Has a 18 nite season on it with no damage. $200
I have many many Mastersbilt, GRT, Rayburn and Barry Wright suspension pieces as well as new bumpers, new and used spindles, liftbars, pinion mounts, j bars, struts, 4 bars, clamp brackets, 5-3.875 rotors, many many 2 pc style lowers (some have Howe balljoints) . I will also post a list.
Many and I mean many newer nice Hypercoil coilover springs as well as Afco and a couple Carreras. I have basically 1-5 of everything but they have been selling fast so call quick!!! Will take $25 ea or make package deals on multiples
Quickchange gears. $35 a set and they are all very very nice.
5.11 this one is a micro blue set and over $200 new
5.28
5.42 standard
5.42 micro blue
5.49
5.63
6.71
7.05
7.14
I have 2 brand new 5.11 Quarter Master gears. New in boxs. Will take $50ea
I have many many Carrera aluminum threaded body shocks that are all perfect and a couple are brand new. I will take $75 ea with the coil over kits. I will get a list up asap.
I have the following Afco shocks for sale. They are all in ready to bolt on condition.
Afco 13 series aluminum coilovers
1393 $60
1393-5 $75
1394RT $60
1390 $75
1373 $60
1375 (I have 3 of these) $60ea
I will take $450 for all 8 as a package
I have a brand new 5.11 Quarter Master gear. New in box. Will take $50
Set of Hooker Harness belts. Complete set that are purple in color and have the gel pads. $400 new, will take $65 shipped to your door.
Mastersbilt steel j-bar. Asking $40
I will be adding more to the list as we go but if you have specific needs and want first option call me asap as I do deal and sell items fast. As stated above I MAY consider a trade for a mod but it would have to be a perfect deal. My asking prices are cash prices not trade value. I have pics of everything for serious buyers!!! 815-990-8865
Rolling with no rims and tires and Afco shocks for $4500
I have a 2004 Barry Wright roller. Car has not been raced since 2007 and was only ran less than 30 nites from 04 to 07. It has never been stubbed or bent badly. It was assembled at Precision Performance (Eckrich's) and has all there components on it. It has a fresh rearend with new tube and side bell as the tube broke the last nite it was ran and has roller bearring birdcages. ATL 26 gal fuel cell, Out-Pace lowers with Howe balljoints, TWM spindles, TWM uppers with Howe balljoints, wilwood pedals, Auto meter gauges, MSD 6T box with soft touch rev control, on board fire suppresion system, Butler seat, impact belts, Carrera aluminum threaded body shocks. Will sell as listed with no rims or tires for $4250. Would also sell this turnkey call for details.
I have a 2002 Mastersbilt square tube frame. It is in nice shape for its age. Frame is powdercoated black. The decking and body was all new and put on by the guys at Out-Pace last summer and has less than 10 nites on it since new. Car will come with the frame, ****pit , decking, body, fuel cell (32 gal), and the brakelines ran for $750 or with Out-Pace lowers(2pc) with Howe balljoints, uppers with balljoints, sweet aluminum spindles, Out Pace rear 4 bars, Complete rearend with TWM nylon cages, Out Pace liftbar, shifter with bert linkages, aluminum radiator for $2000. All ****pit, decking and body are black in color and car looks very nice as it has a Rocket style interior. I want to sell it ASAP so make me an offer!!
I have 7 Integra non cannister shocks. These are the fixed valving gas pressure only adjustable. They are aluminum coilover threaded body shocks. 2 have just been rebuilt with new shafts by Precision Performance (Andy Eckrich) and the other 5 have one nite since they were rebuilt at Port City. I am selling all my latemodel stuff and thats the reason these are going. I have
75 RF
73-5 RF
75-3 LF with take up spring and slider
73-6 5th coil
95-1 LF ahead
96-2 LR behind has take up spring also
93-5 RR
I have inflation tool and some extras as well. Great condition with only the RF having a small ding in the upper bulb but does not affect it in anyway. These are guaranteed ready to bolt on and run. I have them on car now. Will take $1500 obo for everything.
I have a complete 420 all aluminum engine. It is not assembled at this time.
There is nothing wrong with this the owner just tore it down after the season to re ring and bearring it. The track he was running cut the open latemodels and he never had anything done with it. I recently bought his entire operation and have no use for the engine so thats why I am selling. It has very very low nites on it as it was only ran 1 nite a week since new. It has a Rodeck aluminum block with 350 mains, Oliver billet 6" rods, Lunati 3.875 stroke crank, GM 18* heads with Jesel shaft rockers, titanium valves , PSI springs, Heads and intake have been professionally ported. ATI balancer, MSD distributor with wires, roller cam with Shaver Wesmore gear drive, aluminum dry sump pan, aluminum water pump. This is a complete engine package deal that is undamaged and ready to be cleaned and reassembled. I will take $7500 as it is or $9000 assembled with new bearrings, rings, gaskets, and misc. Make an offer as it need to go.
I am selling a B&B Racing engines "Ace" spec engine. This engine was purchased by me from the original owner in a buyout. I have not ever ran it as I already had my own similar engine. I am selling all my spec and latemodel stuff so this is going. The original owner was a local racer and I seen the engine perform every nite it was ran. It has alot of power. The short block was all new 8 nites ago and the topend had about 12 nites on it before it was transfered to this motor. Motor is set up as a wet sump to fit our local tracks rules and could also be ran in a mod or converted to dry sump for Wissota rules.
Here is the run down on the engine. It has a Callies 3.5 stroke 43 lb Magnum crank, Dyers rods, JE Dome pistons, Canton oil pan with power pouch, GM 350 block with a .030 over bore. The heads are Brodix SPEC SPCH heads and have Crower shaft rockers, Edelbrock Super Victor 2925 intake with cooling lines ran, billet CV alum pulleys, MSD distributor with wires, Stewart water pump. This motor only needs a fuel pump to drop it in and run. I did not get dyno sheets with the engine when purchased but it was dynoed at B&B. I can put this on an engine stand to let potential buyer hear and see it run if needed. Original paid over $6500 just for the short block last July. I will take $5850 obo.
I have 390 (extensively under cover modified). owner had over $3000 invested. This carb is only off 30 hp from an open carb. I will take $750 shipped to your door.
9 Weld XL beadlocks that are all in very nice shape and have the rings in them for covers but no covers. I am not selling these until cars are gone unless I have a buyer for all 9. These are 14" wide with 5" backspacing. No junk, no damage!!! Just scuffs and rock dings from racing. I will take $1850 for all 9 shipped to your door. Don't ask me to split because it will not happen unless cars are sold first!!
I have a Brinn trans that has only 8 nites since rebuilt and I am guaranteeing it to be in perfect condition on arrival. I will take $950 for it.
I have a KSE tandem rear mount pump with Peterson pulley and belt. It came with one of the buyouts and I believe it to be in good working order. $375
I have a helmet blower system. Works perfect. $115
36.5" Aluminum fastshaft. Has 4 nites on it since new. Will take $200
37" Quarter Master aluminum shaft. Has a 18 nite season on it with no damage. $200
I have many many Mastersbilt, GRT, Rayburn and Barry Wright suspension pieces as well as new bumpers, new and used spindles, liftbars, pinion mounts, j bars, struts, 4 bars, clamp brackets, 5-3.875 rotors, many many 2 pc style lowers (some have Howe balljoints) . I will also post a list.
Many and I mean many newer nice Hypercoil coilover springs as well as Afco and a couple Carreras. I have basically 1-5 of everything but they have been selling fast so call quick!!! Will take $25 ea or make package deals on multiples
Quickchange gears. $35 a set and they are all very very nice.
5.11 this one is a micro blue set and over $200 new
5.28
5.42 standard
5.42 micro blue
5.49
5.63
6.71
7.05
7.14
I have 2 brand new 5.11 Quarter Master gears. New in boxs. Will take $50ea
I have many many Carrera aluminum threaded body shocks that are all perfect and a couple are brand new. I will take $75 ea with the coil over kits. I will get a list up asap.
I have the following Afco shocks for sale. They are all in ready to bolt on condition.
Afco 13 series aluminum coilovers
1393 $60
1393-5 $75
1394RT $60
1390 $75
1373 $60
1375 (I have 3 of these) $60ea
I will take $450 for all 8 as a package
I have a brand new 5.11 Quarter Master gear. New in box. Will take $50
Set of Hooker Harness belts. Complete set that are purple in color and have the gel pads. $400 new, will take $65 shipped to your door.
Mastersbilt steel j-bar. Asking $40
I will be adding more to the list as we go but if you have specific needs and want first option call me asap as I do deal and sell items fast. As stated above I MAY consider a trade for a mod but it would have to be a perfect deal. My asking prices are cash prices not trade value. I have pics of everything for serious buyers!!! 815-990-8865
