Speed Raycer
Cage Builder
Miller XMT 300 CC/TIG DC Inverter Arc Welder.
$1100 OBO
Good condition. Checked out "good" with CeeKay when I bought it used there in 2004. This machine is a real workhorse of welding. It is not one of those import junk welders with unacceptable duty cycle and overstated ratings. Its duty cycle at 170 amps is 100%, which means that it can be used continuously for most types of stick welding (and as you know, you cannot continuously stick weld, you need to change electrodes, chip slag, etc). It can output 300 amps at 60% duty cycle. It has a thermostat and turns fan on only if it is needed, thus reducing noise, annoyance factor, and dust buildup. Used recently in Roll Cage fabrication and has performed flawlessly.
Volts: 32
Amps 300
Duty Cycle: 60%
It has Auto-Link, which means that it can run off regular household single phase 220v, or from 220v three phase, or from 460v single or three phase, without any rewiring.
DC only. Will not TIG weld aluminum.
Price does not include pedal, torches or stick accessories. Available for additional cost.
314-302-3395 or cagefab@izzyscustomcages.com
Located in St. Louis, MO Call or email to see it in action.
$1100 OBO
Good condition. Checked out "good" with CeeKay when I bought it used there in 2004. This machine is a real workhorse of welding. It is not one of those import junk welders with unacceptable duty cycle and overstated ratings. Its duty cycle at 170 amps is 100%, which means that it can be used continuously for most types of stick welding (and as you know, you cannot continuously stick weld, you need to change electrodes, chip slag, etc). It can output 300 amps at 60% duty cycle. It has a thermostat and turns fan on only if it is needed, thus reducing noise, annoyance factor, and dust buildup. Used recently in Roll Cage fabrication and has performed flawlessly.
Volts: 32
Amps 300
Duty Cycle: 60%
It has Auto-Link, which means that it can run off regular household single phase 220v, or from 220v three phase, or from 460v single or three phase, without any rewiring.
DC only. Will not TIG weld aluminum.
Price does not include pedal, torches or stick accessories. Available for additional cost.
314-302-3395 or cagefab@izzyscustomcages.com
Located in St. Louis, MO Call or email to see it in action.
