need some info

Discussion in 'Big River Sand Drags' started by ministock#77, Nov 25, 2004.

  1. ministock#77

    ministock#77 New Member

    hey i have a mini stocck roller want to drop a v8 and sand drag need to know the specs and rules can someone help

  2. jeremysutton

    jeremysutton Member

    hey well what exactly are u doing, i mean theres 2 classes which u could run, theres an OPEN 4X4 class which has a lot of rules but i dont know them, but then theres a class called comptetion eliminator which is an all et class. Just let me know which class u got in mind ill see what i can tell ya...
  3. jeremysutton

    jeremysutton Member

    hey sorry i gave u some wrong info, since the turck is only a 2wheel drive, u could not run it in the open 4x4 class sorry about that... but there is 2 classes of et brackter style racing that u could run it in.
  4. ministock#77

    ministock#77 New Member

    thanks what i really need is fuel cell info race suit specs belts seat.this truck is setup like a street stock racer i waqnt to drop a v8 and thouugh some paddel tires on and go like hell. i just need to know what some rules are so i dont over kill.and waste my time.
  5. jeremysutton

    jeremysutton Member

    ok sorry it took me so long 2 respond i have been really busy working on my buggy havent had time 2 find a rule book, but here u go. These are not all rules just afew basic ones, FUEL CELL: not many rules on this, just pretty much any fuel cell, can not be mounted in cab, a fire suit for your truck is not mandantory, unless u either run 5.00 or faster, or if u use alcohol,turbo,blower, or nitrous. IF u do need a fire suit, the manufacters tag MUST state "fire retardant". all vehicles must have a 4-point quick release safety harness. All vehicles must have a light on the back of your vehicle that is visibile from 500 feet. Full face helmet with a Snell #90 or equivalent, its recommened that u have a face shied... well anything else u need let me know.

Share This Page