Race Ready Crate LM for Mod

D

dirtrace09

Member
Rayburn 104-4 setup on 4 bar
7 race old GM sealed 604 with extra beehive springs
7 race old JDR Holley UltraHP crate pump gas carb
Schoenfeld triple stepped headers with anti reversion mufflers
7 race old MSD pro billet crate distributor with moroso wires
MSD 7AL high voltage box
reverse mount power steering pump with extra belt
bert ballspline
carbon fiber driveshaft with spare aluminum
rocket style birdcages
7 race old AFCO shocks (rf and 5th coil are rebound adjustable, traction shock is compression adjustable)
14 rims and tires
two sets of spare spindles, extra lowers, a lot of springs, etc...
anything for a late model I can find will go with it.
Fast and easy to drive car.
Race ready for $11,800
Willing to trade for race ready modified of equal value.
 
Willing to seperate. Complete 604 from carb to pan and coupler to fan. Just drop in and race. With paperwork and extra set of beehive springs. Everything for $5900

Car plus carbon fiber driveshaft and spare aluminum with new shocks, extra spindles, extra lowers, extra springs, new front bumper and lower supports in the box and anything else I can find for it. Put in tranny and engine and race. $3000



dirtrace09 said:
Rayburn 104-4 setup on 4 bar
7 race old GM sealed 604 with extra beehive springs
7 race old JDR Holley UltraHP crate pump gas carb
Schoenfeld triple stepped headers with anti reversion mufflers
7 race old MSD pro billet crate distributor with moroso wires
MSD 7AL high voltage box
reverse mount power steering pump with extra belt
bert ballspline
carbon fiber driveshaft with spare aluminum
rocket style birdcages
7 race old AFCO shocks (rf and 5th coil are rebound adjustable, traction shock is compression adjustable)
14 rims and tires
two sets of spare spindles, extra lowers, a lot of springs, etc...
anything for a late model I can find will go with it.
Fast and easy to drive car.
Race ready for $11,800
Willing to trade for race ready modified of equal value.
Click to expand...
 
dirtrace09 said:
Make me an offer on all or part of it. You will get a good deal. Wanting to move
Click to expand...
I'm interested in your engine. Would you also want to sell the transmission? Where you from? I'm in north central ILL. Please call me @ 815-488-0129.
 
Engine and transmission sold. Willing to sell the roller with 15 inch kirkey lightweight seat, roller bearing gas pedal, guages, pedals, 7 race old afco shocks, prc double pass radiator, sweet rack, two sets of extra spindles, extra lowers, several springs, 3 beadlock and one non beadlock rim, msd 7AL ignition, new fuel lines and battery cables for $2500. That is as low as I will go and is a steal.
 
You must log in or register to reply here.




Back
Top