Parts For Sale:
** Aluminum Small Block Motor: Aluminum Pro Action/RHS 14 degree heads, fully CNC ported, titanium valves, Manley ICD titanium retainers & roller springs. Fully ported spider intake manifold, valley cover & spacers. Dart aluminum,raised cam, tall deck block. Block is ready to assemble with a fresh +.010" bore. Block was run with a dry sump system, but has wet sump rear cap. (If you want a wet sump motor for drag racing) Comp Cams belt drive system for raised cam block. Callies Magnum plus 3 7/8 stroke crank, ltwt w/ gun drilled mains, Std/Std. Oliver billet rods. Billet roller cam, lifters, pushrods, T&D shaft rockers. You will need new pistons, a pan, valve covers & gaskets to assemble. $7,900. If you want a 4" stroke motor, I will keep the crank, lower the price & can order you a new one at super deal. JE has pistons, again I can order & probably save you some money. SUPER DEAL for the right person!!
** Rodeck aluminum block, fresh, never run 4.125" bore, never windowed, $2800.
** Almost new KSE tandem power steering/fuel pump for gas. Hex drive to run off the back of a dry sump pump. $400
** Bert ball spline transmission, used in our modified, has about 8-10 nights on it since freshen up. $1100
** Cracked mag Bert bellhousing, $100
** Broken Appelton power rack, $125
** CV Products billet aluminum mechanical gas fuel pump, $100
** POSSIBLE TRADES on ?? I am looking for an ALL Aluminum trailer 28-30ft tag or 36-38ft goose. (Exiss, Optima, Featherlite, etc)
*** Call Steve at 636-677-1320 (work) or 314-374-5660 (cell)
** Aluminum Small Block Motor: Aluminum Pro Action/RHS 14 degree heads, fully CNC ported, titanium valves, Manley ICD titanium retainers & roller springs. Fully ported spider intake manifold, valley cover & spacers. Dart aluminum,raised cam, tall deck block. Block is ready to assemble with a fresh +.010" bore. Block was run with a dry sump system, but has wet sump rear cap. (If you want a wet sump motor for drag racing) Comp Cams belt drive system for raised cam block. Callies Magnum plus 3 7/8 stroke crank, ltwt w/ gun drilled mains, Std/Std. Oliver billet rods. Billet roller cam, lifters, pushrods, T&D shaft rockers. You will need new pistons, a pan, valve covers & gaskets to assemble. $7,900. If you want a 4" stroke motor, I will keep the crank, lower the price & can order you a new one at super deal. JE has pistons, again I can order & probably save you some money. SUPER DEAL for the right person!!
** Rodeck aluminum block, fresh, never run 4.125" bore, never windowed, $2800.
** Almost new KSE tandem power steering/fuel pump for gas. Hex drive to run off the back of a dry sump pump. $400
** Bert ball spline transmission, used in our modified, has about 8-10 nights on it since freshen up. $1100
** Cracked mag Bert bellhousing, $100
** Broken Appelton power rack, $125
** CV Products billet aluminum mechanical gas fuel pump, $100
** POSSIBLE TRADES on ?? I am looking for an ALL Aluminum trailer 28-30ft tag or 36-38ft goose. (Exiss, Optima, Featherlite, etc)
*** Call Steve at 636-677-1320 (work) or 314-374-5660 (cell)
