PDA

View Full Version : need right side axles


Jimmy Cummins
02-23-2008, 12:32 PM
i have a 64" wide rear end out of a versailles or mark 4 i think, it is the wide rear end with stock disc brakes. I think the right is 32" and I could use a few actually. 28 spline. 618-210-3514
26RACETEAM
02-29-2008, 08:19 AM
Yeah Jimmy I Called You And Left A Message About The Axles. If You Are Intersted They Are $90.00 A Piece Plus Shipping. These Are For A 9" Ford Rearend And A 28 Spline Solid. If This Is Not What You Need Just Give Me A Call At (765) 728-8270 Thanks Rob
ALCOHOL
03-04-2008, 06:38 PM
Jimmy,,I think you are going to have to draw the guy a picture of you axle...he don't get it does he? He is just about to wear out his welcome on 4m now.
26RACETEAM
03-05-2008, 05:54 PM
Yeah This Is Why I Posted This Is What They Are For I Can Get All Kinds Of Axles That Is Why I Said To Call Me With What You Needed. I Know What Im Talking About That Was Just An Example It Also Says 28 Spline In His Posts. So If He Want Good Parts At Unbeatable Prices Then He Will Call Thanks. And As For My Welcome On 4m I Sell Alot Of Parts Off Of There So I Think Im Doing Pretty Good. Thanks Rob
ALCOHOL
03-05-2008, 06:43 PM
Price me a Kirkey part # KIR-58100LW seat for me... Seat only.
26RACETEAM
03-06-2008, 05:27 PM
$268.00 Plus Shipping. Thanks If Interested Just Give Me A Call Thanks Rob.
ALCOHOL
03-10-2008, 12:24 PM
To high,,got one for $225 with covers,,,,yours wholesale???
26RACETEAM
03-10-2008, 06:27 PM
Tell Me Were Because I Would Like To Buy Some For That Price And Resale Them!!!!!
Jimmy Cummins
03-10-2008, 09:20 PM
HOW ABOUT SOME AXLES????????? 32" flange to end of splines out of a mid 70's versailles or mark series. I have tried to shorten other axles, redrill bolt patterns, move the bearings, etc I am done with it. serious inqueries only!!!
ALCOHOL
03-11-2008, 08:30 AM
Hey Jimmy,,,try Shaner's Auto Salvage in Springfield Il...Don't know their # but they did have a bunch of 9" stuff ...Also try Sheppards Auto Crushing in New Berlin Il...
ALCOHOL
03-11-2008, 08:32 AM
Tell Me Were Because I Would Like To Buy Some For That Price And Resale Them!!!!!

Internet my friend,,just look around.
26RACETEAM
03-11-2008, 06:11 PM
Thanks I Will Keep That In Mind.

Thanks Again.
26RACETEAM
03-11-2008, 06:14 PM
HOW ABOUT SOME AXLES????????? 32" flange to end of splines out of a mid 70's versailles or mark series. I have tried to shorten other axles, redrill bolt patterns, move the bearings, etc I am done with it. serious inqueries only!!!


YEAH JIMMY ALCOHOL IS RIGHT I WOULD GO TO THE SALVAGE YARD AND GET THEM I CAN'T GET STUFF LIKE THAT. I WISH I COULD HELP BUT THAT KIND OF STUFF YOU HAVE TO GET FROM A SALVAGE YARD OR A JUNK YARD.
Flash32
03-12-2008, 10:04 PM
http://peytonperformance.com/
Ask for Rodney, he has any kind of stock axle you need! They are in Waxahatchie TX. Real quick ship!
Tell him Andy Gordon sent ya!