carb ?

[kitselman36]

I have a 350 bored .060
10.5:1 pistons
solid cam
running on pump gas
with a holley 500 2 barrel
I know its running really rich,
how do I figure out what jets to use
to get me in the ball park?

[Ben34]

For open comp night I used 77's or 78's in mine but it does depend on your motor specs. Someone who really knows what they are doing helps too. With 82's it sputtered and spit once it got above 3500 rpm.
Hope that helps some

[nuts n bolts]

go with a78 or 80 and use a6.5 powervalve set timing at 36 and you should be real good

[kitselman36]

is this right ? set the timing at 36. thats sounds like a lot . just want to make sure I got this right

[2xtremeracing2]

Yea.....36 or 37....but helps to make sure you have a little carbon builtup first...if the motor is fresh....we run em at like 20 till we get some hours on it....then up to 37......you will see a major difference!

[CC-28]

I run 76's with the same motor at 12.5 to 1 at 32 degrees of timing and it ran great. Would stay at 180 till the end of the race, and thats with a plastic fan and no shroud.

[AUTO383]

I would get a 4barrel intake and carb. just my two cents