Search results

2013 Hoffman with '15 front clip roller minus motor, trans, lead and shocks. Has ford 9 with 600 gear, set up as Usra bmod with Howe low friction ball joints, Fk rod ends, hypercoil springs, 22 gal rci fuel cell, kirkey seat, Simpson belts, front and rear bumpers. $7500 with new hood, nose and...

These are 200cc intake runner heads

They are 200cc intake runners

I'm not on here much, anymore questions my cell number is 417-209-0769 text or call

Sry for the late replies but I'm in republic, mo but can ship at buyers expense and yes on 200cc runners that's what i was told by my engine builder when we first got them but can double check to make sure

Rhs pro action 23 degree cast iron heads. 2.02/1.6 ferrea valves 1.437 valve springs, 3/8 screw in studs with guide plates, Pep (precision engine parts) stainless steel full roller rockers 1.6 ratio with poly locks, angle plug, 62cc chamber $800

Rhs pro action 23 degree cast iron heads. 2.02/1.6 ferrea valves 1.437 valve springs, 3/8 screw in studs with guide plates, Pep (precision engine parts) stainless steel full roller rockers 1.6 ratio with poly locks, angle plug, 62cc chamber $800

Rhs pro action 23 degree cast iron heads. 2.02/1.6 ferrea valves 1.437 valve springs, 3/8 screw in studs with guide plates, Pep (precision engine parts) stainless steel full roller rockers 1.6 ratio with poly locks, angle plug, 62cc chamber $800

posting for a friend. 19x26 dbl pass griffin radiator with internal tranny/oil cooler no leaks and never been repaired asking $110

posting for a friend. 19x26 dbl pass griffin radiator with internal tranny/oil cooler no leaks and never been repaired asking $110

posting for a friend. 19x26 dbl pass griffin radiator with internal tranny/oil cooler no leaks and never been repaired asking $110

posting for a friend. 19x26 dbl pass griffin radiator with internal tranny/oil cooler no leaks and never been repaired asking $110

still for sale, need it gone, make me a offer

1993 Chevy Silverado Ext cab 4x4, 5 speed manual w/overdrive(was rebuilt 4yrs ago), 3.73 rear gear (put brand new ring & pinion and bearings in may 2011), has new shocks in the front and has Bilstein gas shocks in the rear(3yrs old), has power locks and windows, cruise control, 4.3L v6 86,xxx...

its a 1998 Dirtworks dw8 chassis #1270 had the front end updated at hoffmans back in 2009.currently setup as a 3 link but has the mounts and spacers to be a 4 bar car. has bilstein shocks that have been customed valved by wade cross at fx suspensions that are only 8 nights old since had been...

tranny is sold everything is still for sale

ive got a 3speed saginaw,bellhousing,ram assault mini clutch(only has 2 seasons on it),quarter master free floating throwout bearing with external bleeding screw. $550 for all but might be willing to seperate