This motor is as good as they get with H.P. and Torque with being smooth with a great racing RPM curve To build this motor today would cost 25K Save $$$.. Nothing but the best of parts in this motor. Dyno time and LESS THAN 1 NITE ON IT .. Only reason for selling is other intrest and sold car and parts this is all that is left...
Here is the info on the motor:
Dart Lil M Block (steel) all 5 steel billet main caps
Polished Callies Crankshaft
Eagle H Beam Rods with ARP 2000 Rod Bolts
J & E Custom Pistons & Pins
Crane Roller Camshaft
Isky Roller Lifters
Dart Pro 1 Alum Heads C N C 'd 2.080 Int valves 1.600 Ext Valves With 227 Runners
Stainless Steel Valves
Isky Springs
Titanium Retainers & Locks
Jessel Pro Seris Rocker System 1.7/1.65
Head Studs
Edelbrock Super Victor Alum Intake Fully Ported With Spacer
MSD Pro Billet Dist w/cap and Scott 8mm Wires
Alum Water Pump plumbed into Block
Melling Oil Pump
Champ Oil Pan
O-Berg System
14.5 Compression
Everything balanced and blueprinted
635 H.P.
564 Torque
ONLY TOP QUALITY PARTS WERE USED as you can see .......
Motor was on gas and mild carb when run on dyno so the H.P. and Torque will go up with Alky and Good Carb
This motor was built to run.... Built by Pro Craft Race Engines
Have other intrest needs to go.
This is NOT a freshen up ALL NEW parts were used............
$12K OBO
SPECIAL PRICE TILL END OF YEAR .............. DON'T MISS THIS OFFER ..................
Call or Text (618) 806-2101
Thanks Rodger
Here is the info on the motor:
Dart Lil M Block (steel) all 5 steel billet main caps
Polished Callies Crankshaft
Eagle H Beam Rods with ARP 2000 Rod Bolts
J & E Custom Pistons & Pins
Crane Roller Camshaft
Isky Roller Lifters
Dart Pro 1 Alum Heads C N C 'd 2.080 Int valves 1.600 Ext Valves With 227 Runners
Stainless Steel Valves
Isky Springs
Titanium Retainers & Locks
Jessel Pro Seris Rocker System 1.7/1.65
Head Studs
Edelbrock Super Victor Alum Intake Fully Ported With Spacer
MSD Pro Billet Dist w/cap and Scott 8mm Wires
Alum Water Pump plumbed into Block
Melling Oil Pump
Champ Oil Pan
O-Berg System
14.5 Compression
Everything balanced and blueprinted
635 H.P.
564 Torque
ONLY TOP QUALITY PARTS WERE USED as you can see .......
Motor was on gas and mild carb when run on dyno so the H.P. and Torque will go up with Alky and Good Carb
This motor was built to run.... Built by Pro Craft Race Engines
Have other intrest needs to go.
This is NOT a freshen up ALL NEW parts were used............
$12K OBO
SPECIAL PRICE TILL END OF YEAR .............. DON'T MISS THIS OFFER ..................
Call or Text (618) 806-2101
Thanks Rodger
