help on rayburn chassis

[LateModel21]

i would like someone to help me out a basic setup for the new rayburn suspension setup i don't want all the answers i just want some guidelines on where i should even start. i would really appreciate it if someone would give me some pointers.

 

[jpugh]

Go to www.cjrayburn.com to get his setup. I am assuming you don't have that to start with.

 

[little302]

^^

 

[liquidqwik]

Hello I need help!!!!!!!!!!!!!!!!!!!!!

 

[Dirtracer]

If your a begginer I would probably put a 550lf, 500rf, 400lr, and a225RR springs on the car,set front ride heights at 2.25lf, 2.50rf, and 4.5 across the rear. Then use the 5030 Bilstien shocks for begginer.Get about 56%left,56.5%rear and set the front tire weights even which will give you anywhere from 280lb to 300lb of left rear weight split over the right.set pinion angle to 7.5 degrees, and just a touch of preload on the pullbar.Then more important than the set-up is learning to be smooth behind the wheel then speed will come later. GOOD LUCK