M/R Racing
New Member
1999 MastersBilt copy Dirt Late Model roller – FOR SALE
Complete roller - Specht/Randercar chassis – copy of a ’99 Masterbilt, modified to a 2x3 frame chassis. Car had won the ’99 Limited Late model championship at EWSC with Scott Specht. Car would be a nice older limited late model, has been recently all gone through and rebuilt. Car has a new body with new interior and new MD3 nose package.
Rolling Chassis includes:
(4) Afco threaded body shocks in great shape
(4) Springs (mounted in the car on the coilovers)
All steering linkage
Appleton rack w/only 5 nights since fresh from Appleton
Aluminum KRC power steering pump and tank with lines and pulleys
Complete Wilwood pedals
All brake lines from drivers comp to the wheels, braided at each wheel
Single piston calipers (new last season)
Coleman dial brake adjuster
Longacre brake bias gauges
Howe aluminum radiator with braided lines and hoses
Throttle pedal and linkage
Autometer oil pressure and water temperature gauges
Afco master disconnect switch
Longacre switch panel w/pushbutton start
Moroso Monster recall tachometer 6811
MSD Blaster 2 coil and MSD 6T ignition box
Purple RJS 5 point safety harnesses
Aluminum paw saver steering wheel with center pad
Gray mesh window net with hardware
Complete steel tubed Winters quick change - set-up as 4 link, steel birdcages, coil over shocks, shock mounts, panhard bar, all brackets, 6th coil lift bar with shock and spring, etc (no gears included)
Coleman aluminum driveshaft with yoke
(4) Winters Wide 5 hubs with rotors
Afco upper and lower a-arms, sweet spindles
2 lever aluminum shifter
Napa Exide dry cell battery complete with cables
Jaz 15gal fuel cell and Fram fuel filter
All stainless braided fuel lines up to the fuel pump
All ballast as scaled (around 200lbs)
(4) standard 14” aluminum rims (right rear is a bead lock) w/nice used Hoosier dirt tires
This would make an excellent limited late model or dirt Pro Stock - Complete rolling chassis as described could be parted out for more than $4000. (Not including chassis, interior or body) Does not include pictured engine, transmission or dry sump system.
Asking price is $2950 obo
920-528-7090, www.mrracingequipment.com
Complete roller - Specht/Randercar chassis – copy of a ’99 Masterbilt, modified to a 2x3 frame chassis. Car had won the ’99 Limited Late model championship at EWSC with Scott Specht. Car would be a nice older limited late model, has been recently all gone through and rebuilt. Car has a new body with new interior and new MD3 nose package.
Rolling Chassis includes:
(4) Afco threaded body shocks in great shape
(4) Springs (mounted in the car on the coilovers)
All steering linkage
Appleton rack w/only 5 nights since fresh from Appleton
Aluminum KRC power steering pump and tank with lines and pulleys
Complete Wilwood pedals
All brake lines from drivers comp to the wheels, braided at each wheel
Single piston calipers (new last season)
Coleman dial brake adjuster
Longacre brake bias gauges
Howe aluminum radiator with braided lines and hoses
Throttle pedal and linkage
Autometer oil pressure and water temperature gauges
Afco master disconnect switch
Longacre switch panel w/pushbutton start
Moroso Monster recall tachometer 6811
MSD Blaster 2 coil and MSD 6T ignition box
Purple RJS 5 point safety harnesses
Aluminum paw saver steering wheel with center pad
Gray mesh window net with hardware
Complete steel tubed Winters quick change - set-up as 4 link, steel birdcages, coil over shocks, shock mounts, panhard bar, all brackets, 6th coil lift bar with shock and spring, etc (no gears included)
Coleman aluminum driveshaft with yoke
(4) Winters Wide 5 hubs with rotors
Afco upper and lower a-arms, sweet spindles
2 lever aluminum shifter
Napa Exide dry cell battery complete with cables
Jaz 15gal fuel cell and Fram fuel filter
All stainless braided fuel lines up to the fuel pump
All ballast as scaled (around 200lbs)
(4) standard 14” aluminum rims (right rear is a bead lock) w/nice used Hoosier dirt tires
This would make an excellent limited late model or dirt Pro Stock - Complete rolling chassis as described could be parted out for more than $4000. (Not including chassis, interior or body) Does not include pictured engine, transmission or dry sump system.
Asking price is $2950 obo
920-528-7090, www.mrracingequipment.com