I have a race ready 355 out of an I-55 allied Sportsman, the shortblock has Scat rods and cast steel crank, TRW flattop pistons with Total Seal Gapless rings,Manley one piece pushrods, Melling race hv oil pump, ACL rod and Main bearings, Champ circle track race pan, Comp Cams solid flat tappet cam and lifters, adjustable double roller timing set, the block has been decked to 0 deck height, bored and honed with deckplates, and the lifter grooves bored for extra oiling protection on the flat tappet cam. The motor has 19 nights total, but was freshened with new cam, lifters, pushrods, bearings, rings, and oil pump with only 3 nights on them. I'll take $1600 OBO for shortblock. The RHS heads are BRAND NEW, with NEW valves, springs, retainers and locks, guideplates, and screw in studs; the 1.5 roller rockers are used with 19 nights on them. They are 200cc intake runners, with 50cc chambers, 2.02/1.60 valves. These heads new with ok stuff from Speedway are $950 plus shipping without the rockers and poly locks, and the circle track valve covers, I'm asking $850 for them complete. I also have a brand new Hurricane intake $150 OBO, its all together and I will sell together for $2300 or seperate. The motor has never been fired up with the new heads, never even set the valves, I ran out of money on my bmod project. May take trades, let me know! (636)-232-1428
