terrellracing
New Member
I have a 360 CI SBC motor for sale.
I built this motor to run as a B-Mod, but it could be used in other classes as well or street/strip. This motor is ready to drop in and go. just needs starter
It is a .060 over bore chevy block. the block has been decked, line bored, lifter valley has been polished, and has lifter valley vents.
It has a 42 lb., 3.48 stroke, Nitrated forged crank, 6" H-beam floated rods, KB Hyper pistons, speed pro rings, clevite H-Series rod and main bearings, new cam bearings,
big block oil pump and pickup, champ 7 qt pan, new 9 degree adjustable timing chain, aluminum timing cover, new high flow aluminum water pump, new 6 3/4" harmonic
balancer, new aluminum 25% reduction pulleys, 4 blade 15" high flow fan.
Heads are World Product Sportsman 2's, that have been milled to 52CC's, Stainless Steel valves, Brand New Scorpion 7/16 aluminum roller rocker arms, Brand New 1.437 springs, straight plugs,
Edelbrock performer intake, holley 4412 2-barrel carb, new HEI distributer.
Cam is a Howards custom grind 2-barrel cam, with a 4-7 swap.
Does not include starter.
motor produced - 534 HP / 494 FT. lb Torque
This motor only has break in time/dyno time and about 15 laps on it. nothing wrong with motor at all. just needing to sell. got a ride for next year
$4700 SHIPPED.
can get more pics if interested.
I built this motor to run as a B-Mod, but it could be used in other classes as well or street/strip. This motor is ready to drop in and go. just needs starter
It is a .060 over bore chevy block. the block has been decked, line bored, lifter valley has been polished, and has lifter valley vents.
It has a 42 lb., 3.48 stroke, Nitrated forged crank, 6" H-beam floated rods, KB Hyper pistons, speed pro rings, clevite H-Series rod and main bearings, new cam bearings,
big block oil pump and pickup, champ 7 qt pan, new 9 degree adjustable timing chain, aluminum timing cover, new high flow aluminum water pump, new 6 3/4" harmonic
balancer, new aluminum 25% reduction pulleys, 4 blade 15" high flow fan.
Heads are World Product Sportsman 2's, that have been milled to 52CC's, Stainless Steel valves, Brand New Scorpion 7/16 aluminum roller rocker arms, Brand New 1.437 springs, straight plugs,
Edelbrock performer intake, holley 4412 2-barrel carb, new HEI distributer.
Cam is a Howards custom grind 2-barrel cam, with a 4-7 swap.
Does not include starter.
motor produced - 534 HP / 494 FT. lb Torque
This motor only has break in time/dyno time and about 15 laps on it. nothing wrong with motor at all. just needing to sell. got a ride for next year
$4700 SHIPPED.
can get more pics if interested.
