--------------------------------------------------------------------------------
Little m block fresh .40 over, lunati 3.875 crank, dyers 6 inch billet rods, je 8cc dome pistons around 15 to 1, custom roller cam by tony barker, crower roller lifters, brand new pontiac 867 raised runner heads from brodix, were raw castings, ported, new titanium intakes, hollow stem exausts, milled to 21 degrees, brodix raised runner intake, crower shaft rockers, jim evans 930 alky carb, canton high dollar steel pan. Has not been ran, will dyno for buyer. Everything is brand new minus block, crank, rods, rockers, pan, carb, which have very little time on them. $11,000 including the dyno time on me. Way over $15,000 invested. Should make a good, smooth 675 horse easy.
Little m block fresh .40 over, lunati 3.875 crank, dyers 6 inch billet rods, je 8cc dome pistons around 15 to 1, custom roller cam by tony barker, crower roller lifters, brand new pontiac 867 raised runner heads from brodix, were raw castings, ported, new titanium intakes, hollow stem exausts, milled to 21 degrees, brodix raised runner intake, crower shaft rockers, jim evans 930 alky carb, canton high dollar steel pan. Has not been ran, will dyno for buyer. Everything is brand new minus block, crank, rods, rockers, pan, carb, which have very little time on them. $11,000 including the dyno time on me. Way over $15,000 invested. Should make a good, smooth 675 horse easy.
