M/R Racing
New Member
Asphalt Modified FOR SALE
Complete roller MOD – Car is a “barn find” that has been sitting for about 7 years since it was last raced. Car was the Madison International 1998 championship car. Car had a mild freshen in ’00 or ’01 and raced 2 races, then has been sitting in storage ever since. ’75 Chevelle front stub, includes upper and lower a-arms, full suspension front and back – full undamaged interior –fair condition body with “seasoned” bumpers and nerfs. Brake cylinders move, but need rebuilds including the clutch slave. Gunslinger brand chassis, about 10 years old, under slung rear clip, chassis number 007. Three link with coil over eliminators. Older chassis that has been tweaked. The front stub is bent ahead of the spring pockets, as well as a kink behind the right side frame. Older chassis could use a new stub if not parted out. Engine is also for sale.
Rolling Chassis includes:
(4) Carrera shocks (only 2 nights old (and 7 years) since new)
(4) Springs (mounted in the car)
All steering linkage
Howe steering quickener
Manual steering assembly
Floor mount Dual brake pedal w/Afco masters (need rebuild)
All brake lines from drivers comp to the wheels, braided at each wheel
CNC Floor mount clutch pedal w/CNC master
Fan/crank pulleys/nylon fan/aluminum spacer
Schoenfeld crossover headers with Brzezinski 2 into 1 collector and Schoenfeld muffler
Howe aluminum radiator with lines and hoses
Throttle pedal and linkage
Stewart Warner oil pressure and Autometer water temperature gauges
Afco master disconnect switch
Longacre aircraft flip-up switch panel w/pushbutton start
Moroso Monster recall tachometer
(2) racing mirrors w/brackets
Kirkey seat
5 point safety harnesses (outdated)
aluminum steering wheel with center pad
Black ribbon window net with hardware
Complete Ford 9” rear end (non-floater) set-up as 3 link, steel birdcages, coil over eliminators, shock mounts, panhard bar, all brackets, etc (no gears included)
Driveshaft with yoke
2 lever aluminum shifter
Standard dead battery and cables
RCI 8gal fuel cell and Fram fuel filter
(4) standard 8” rims w/used Hoosier 53 tires
Complete rolling chassis as described could be parted out for more than $2200. (Not including chassis, body or front suspension) Does not include pictured engine or transmission.
Asking price is $1500 or will part out by September 25th.
Also includes some spare parts including (2) lower a-arms, spare springs, brake hat and some other suspension.
We will take best offer by July 15th, or part it out. Decent parts, very inexpensive start for a Sport Mod or Cheap asphalt mod – Could also include Bell/clutch/tranny (that are in it) for an additional $500 or also include a Ford 9” third member (gear of choice) with mini-spool for an additional $250.
Minor freshening and add only engine and go racing for $2250
Contact M/R Racing Equipment (920)-528-7090 or www.mrracingequipment.com
Complete roller MOD – Car is a “barn find” that has been sitting for about 7 years since it was last raced. Car was the Madison International 1998 championship car. Car had a mild freshen in ’00 or ’01 and raced 2 races, then has been sitting in storage ever since. ’75 Chevelle front stub, includes upper and lower a-arms, full suspension front and back – full undamaged interior –fair condition body with “seasoned” bumpers and nerfs. Brake cylinders move, but need rebuilds including the clutch slave. Gunslinger brand chassis, about 10 years old, under slung rear clip, chassis number 007. Three link with coil over eliminators. Older chassis that has been tweaked. The front stub is bent ahead of the spring pockets, as well as a kink behind the right side frame. Older chassis could use a new stub if not parted out. Engine is also for sale.
Rolling Chassis includes:
(4) Carrera shocks (only 2 nights old (and 7 years) since new)
(4) Springs (mounted in the car)
All steering linkage
Howe steering quickener
Manual steering assembly
Floor mount Dual brake pedal w/Afco masters (need rebuild)
All brake lines from drivers comp to the wheels, braided at each wheel
CNC Floor mount clutch pedal w/CNC master
Fan/crank pulleys/nylon fan/aluminum spacer
Schoenfeld crossover headers with Brzezinski 2 into 1 collector and Schoenfeld muffler
Howe aluminum radiator with lines and hoses
Throttle pedal and linkage
Stewart Warner oil pressure and Autometer water temperature gauges
Afco master disconnect switch
Longacre aircraft flip-up switch panel w/pushbutton start
Moroso Monster recall tachometer
(2) racing mirrors w/brackets
Kirkey seat
5 point safety harnesses (outdated)
aluminum steering wheel with center pad
Black ribbon window net with hardware
Complete Ford 9” rear end (non-floater) set-up as 3 link, steel birdcages, coil over eliminators, shock mounts, panhard bar, all brackets, etc (no gears included)
Driveshaft with yoke
2 lever aluminum shifter
Standard dead battery and cables
RCI 8gal fuel cell and Fram fuel filter
(4) standard 8” rims w/used Hoosier 53 tires
Complete rolling chassis as described could be parted out for more than $2200. (Not including chassis, body or front suspension) Does not include pictured engine or transmission.
Asking price is $1500 or will part out by September 25th.
Also includes some spare parts including (2) lower a-arms, spare springs, brake hat and some other suspension.
We will take best offer by July 15th, or part it out. Decent parts, very inexpensive start for a Sport Mod or Cheap asphalt mod – Could also include Bell/clutch/tranny (that are in it) for an additional $500 or also include a Ford 9” third member (gear of choice) with mini-spool for an additional $250.
Minor freshening and add only engine and go racing for $2250
Contact M/R Racing Equipment (920)-528-7090 or www.mrracingequipment.com
