Dart Buick Heads complete top end package. Heads were ported by Harper Porting Service (one of the top buick guys), raised oval ports, 2.20/1.625 titanium valves, triple manley springs tit retainers 350lb@2.00", 37cc chambers,setup for port injection, flow 370 no epoxy! Heads are fresh! Matching CFE Sheet Metal intake with three different tops,4150,2-4150,2-4500 and is setup for injection or fogger nozzels!
T&D 1.70in,ex shaft rockers, cast valve covers, New Isky raised body Lifters, 7/16 pushrods, Head studs, Choice of roller camshaft (have 12) full set of gaskets! These heads are currently set-up with a tall deck small block(spacer plates bolted to the bottom of the intake) but can be put on a std deck! These heads were used on a 434" Bonneville motor! I have few sets of pistons that can also be purchased! $4000 OBO can substitute items if needed! Sportsman II roller ready heads $500, Cloyes Hex Adjust raised cam timing chain $75 Dart Buick late model or modified headers $75 Please contact me at 573-705-8805 or dwl.mallow@sbcglobal.net
Thanks for looking! David
T&D 1.70in,ex shaft rockers, cast valve covers, New Isky raised body Lifters, 7/16 pushrods, Head studs, Choice of roller camshaft (have 12) full set of gaskets! These heads are currently set-up with a tall deck small block(spacer plates bolted to the bottom of the intake) but can be put on a std deck! These heads were used on a 434" Bonneville motor! I have few sets of pistons that can also be purchased! $4000 OBO can substitute items if needed! Sportsman II roller ready heads $500, Cloyes Hex Adjust raised cam timing chain $75 Dart Buick late model or modified headers $75 Please contact me at 573-705-8805 or dwl.mallow@sbcglobal.net
Thanks for looking! David
