engine parts

racer94

racer94

Active Member
i have a brand new scat 9000 series crank,still in box(3.48 stroke),scat 4130 rods new in box with arp bolts(5.7) and a set of new in box speed pro .030 over pistons..will take $400 FIRM NO LESS for all of it and i will throw in an 010 350 4 bolt main block that is .030 over..thanks

also have a set of never used wiseco forged dome pistons..they are for a 400 4.125 bore,1.550 dome...use these with the parts above and would make a descent 377..the pistons are the lightweight 2 ring design,dont have pins,but have spirolox..take $125 for them
 
i am in fulton..block isnt fresh but it is fresh enough to rigde ream the top of the cylinders,hone it, and run oversized rings...everything else is brand new.thanks
 
I need the part # on the pistons if you have them and also figure out when/where we can hook up and do this deal. I'm in Foristell
Thanks,
JIM
 
piston part numbers for the speed pro's are h345np30..they have pins with them...i could meet you anytime to do the deal just let me know a free time and a place to meet.my number is 573-592-8285 or email me at swinha@aol.com
 
wiseco pistons

here is a picture of the wiseco 400 pistons,they are in good shape,have no pins....
 
block was my brothers,it was in his strret truck,it ran when i pulled it apart to put all the new stuff in it,just never got around to doing it..
 
I am interested in the flat top pistons, crank, rods, and stuff you have posted. Very interested. Give me a call please.

Tim
618-570-9521
 
You must log in or register to reply here.




Back
Top