Scott Meier
New Member
Selling out all Briggs flathead parts and miscellaneous karting equipment. Briggs flathead parts include both new and used parts. Used parts are clean and in good condition. Prices negotiable. Call Scott Meier at 314-846-9112 if interested.
Briggs Flathead Parts - New Unused Parts
Cylinder head, Raptor style, blueprinted, $30.00
Crankcase cover, Raptor style, $20.00
PTO side bearing, Raptor style, 1.005 journal size, $8.00
Flywheel side bearing, conversion bearing for single bearing crank in dual bearing block, $12.00
Head bolt, long length, 8 for $8.00
Head bolt, short length, 6 for $6.00
Head bolt, long w/stud, 2 for $3.00
Spark plug, NGK #BU8H, surface gap style, 2 for $5.00
Briggs Flathead Parts - Used Parts
Carburetor, Raptor style, #5 casting, honed, flat gasket surfaces, no cracks, $50.00
Block, “M” block, aluminum bore, standard bore, intake ported, lifter bores welded and chamfered, valve spring pockets back-faced, new exhaust valve guide/reamed, $50.00
Block, Raptor I, iron bore, .020” over, ported, lifter bores not welded, no valve spring back-facing, $25.00
Crankshaft, main journal round (.9985”/.9980”), .792" PTO bearing size, $40.00
Crankcase cover, older style with 1.847 o.d. bearing, $15.00
Cylinder head, non-raptor style, blueprinted, chamber glass beaded, $15.00
Cylinder head, non-raptor style, stock, chamber glass beaded, $10.00
Cylinder head, non-raptor style, stock, as-is, $8.00
Flywheel, stock 5 hp. cast iron, no longer available from B&S, $25.00
Coil, 2750 ohm, $15.00
Blower housing, rounded style, bead blasted & black paint, $15.00
Blower housing, squared style, w/steel perforated screen, $10.00
Flywheel guard “tin”, 4 available, $1.00 each
Cylinder shield "tin", 2 available, $2.00 each
Cylinder head cover "tin", $2.00
Starter clutch assembly, 2 available, $3.00 each
Head bolt, long length, 9 for $5.00
Head bolt, short length 9 for $5.00
Head bolt, long w/stud, 2 for $2.00
Cam timing gear, 1.005" bore - Raptor style, $3.00
Cam timing gear, .792" bore - small journal style, $3.00
Flywheel "bellville" washer & nut, 3 available, $1.00 each
Breather grommet, 4 for $1.00
Oil sensor cover, 2 for $1.00
Starter rewind, $5.00
Briggs Tools
Comp Cams valve spring pressure checker, $50.00
Wheels - Douglas Polished
5" diameter x 8" wide (4" inner/4" outer), american bolt pattern, 2 available, $12.00 each
5" diameter x 7¼" wide (2½" inner/4¾" outer), american bolt pattern, 6 available, $12.00 each
5" diameter x 6½" wide (2½" inner/4" outer), american bolt pattern, 3 available, $12.00 each
5" diameter x 6" wide (2½" inner/3½" outer), american bolt pattern, 2 available, $12.00 each
5" diameter x 5⅛" wide (1⅝" inner/3½" outer), american bolt pattern, 2 available, $10.00 each
5" diameter x 5" wide (2½" inner/2½" outer), american bolt pattern, 4 available, $10.00 each
Gauges
Digitron DT32 gauge, RPM/CHT, with leads, $75.00
Bodywork & Seat
Caliba sprint seat, fully padded, large size, $40.00
Side pods, older retangular CIK style, black, trimmed for Briggs engine, $10.00 pair
Side panels with top flange, clear lexan, $10.00 pair
Safety Equipment
Gearbox "4G" style suit, european size 42 (rookie/junior size) black legs/arms/waist, yellow chest/shoulder area, black/white checker accent, excellent condition, original cost $220.00, sell for $75.00
Bieffe BR19 helmet, full face, yellow/black graphics, x-small size, Snell 95 rating, $50.00
Ringers "Split-Fit" gloves, black, x-small (size 7), $5.00 pair
Briggs Flathead Parts - New Unused Parts
Cylinder head, Raptor style, blueprinted, $30.00
Crankcase cover, Raptor style, $20.00
PTO side bearing, Raptor style, 1.005 journal size, $8.00
Flywheel side bearing, conversion bearing for single bearing crank in dual bearing block, $12.00
Head bolt, long length, 8 for $8.00
Head bolt, short length, 6 for $6.00
Head bolt, long w/stud, 2 for $3.00
Spark plug, NGK #BU8H, surface gap style, 2 for $5.00
Briggs Flathead Parts - Used Parts
Carburetor, Raptor style, #5 casting, honed, flat gasket surfaces, no cracks, $50.00
Block, “M” block, aluminum bore, standard bore, intake ported, lifter bores welded and chamfered, valve spring pockets back-faced, new exhaust valve guide/reamed, $50.00
Block, Raptor I, iron bore, .020” over, ported, lifter bores not welded, no valve spring back-facing, $25.00
Crankshaft, main journal round (.9985”/.9980”), .792" PTO bearing size, $40.00
Crankcase cover, older style with 1.847 o.d. bearing, $15.00
Cylinder head, non-raptor style, blueprinted, chamber glass beaded, $15.00
Cylinder head, non-raptor style, stock, chamber glass beaded, $10.00
Cylinder head, non-raptor style, stock, as-is, $8.00
Flywheel, stock 5 hp. cast iron, no longer available from B&S, $25.00
Coil, 2750 ohm, $15.00
Blower housing, rounded style, bead blasted & black paint, $15.00
Blower housing, squared style, w/steel perforated screen, $10.00
Flywheel guard “tin”, 4 available, $1.00 each
Cylinder shield "tin", 2 available, $2.00 each
Cylinder head cover "tin", $2.00
Starter clutch assembly, 2 available, $3.00 each
Head bolt, long length, 9 for $5.00
Head bolt, short length 9 for $5.00
Head bolt, long w/stud, 2 for $2.00
Cam timing gear, 1.005" bore - Raptor style, $3.00
Cam timing gear, .792" bore - small journal style, $3.00
Flywheel "bellville" washer & nut, 3 available, $1.00 each
Breather grommet, 4 for $1.00
Oil sensor cover, 2 for $1.00
Starter rewind, $5.00
Briggs Tools
Comp Cams valve spring pressure checker, $50.00
Wheels - Douglas Polished
5" diameter x 8" wide (4" inner/4" outer), american bolt pattern, 2 available, $12.00 each
5" diameter x 7¼" wide (2½" inner/4¾" outer), american bolt pattern, 6 available, $12.00 each
5" diameter x 6½" wide (2½" inner/4" outer), american bolt pattern, 3 available, $12.00 each
5" diameter x 6" wide (2½" inner/3½" outer), american bolt pattern, 2 available, $12.00 each
5" diameter x 5⅛" wide (1⅝" inner/3½" outer), american bolt pattern, 2 available, $10.00 each
5" diameter x 5" wide (2½" inner/2½" outer), american bolt pattern, 4 available, $10.00 each
Gauges
Digitron DT32 gauge, RPM/CHT, with leads, $75.00
Bodywork & Seat
Caliba sprint seat, fully padded, large size, $40.00
Side pods, older retangular CIK style, black, trimmed for Briggs engine, $10.00 pair
Side panels with top flange, clear lexan, $10.00 pair
Safety Equipment
Gearbox "4G" style suit, european size 42 (rookie/junior size) black legs/arms/waist, yellow chest/shoulder area, black/white checker accent, excellent condition, original cost $220.00, sell for $75.00
Bieffe BR19 helmet, full face, yellow/black graphics, x-small size, Snell 95 rating, $50.00
Ringers "Split-Fit" gloves, black, x-small (size 7), $5.00 pair
