Rolling 2000 Harris chrome moly chassis with 2002 tail updates, complete drivetrain, open trailer with tire rack and over $2000 worth of spare parts.
Multiple feature winner, raced less than 100 nights. Engine is a solid long-rod, 400 block Chevrolet with balanced components.
Currently setup as a 2-link with long panhard bar and Harris spring torque link.
Pro Comp lightweight glow gauge pack (Oil Press. Fuel Press. Water Temp)
Quick Car mini Brake Bias gauges
Auto Meter 10,000 RPM memory tach
Wilwood composite pedals and master cylinders for brake and clutch
Lightweight front spring pockets and jacker bolts
32 gallon fuel cell with can
Aeroquip StarLite fuel line (both source and return) with Aeroquip fittings
Howe steering quickener
Performance Friction brake pads (small metric size front and rear)
31 spline 9" Ford floater rear-end
Big GM front spindles
5 x 5 bolt pattern front and rear
AFCO springs and shocks
Light aluminum radiator
Bumpers and Nerf bars are used but not all bent up
Engine components (needs freshened)
Long rod, 400 block Chevrolet
World Products iron heads
Victor Jr tall intake
Fluidyne balancer
KSE tandem fuel/ps pump
Drive train
529 rear gears
Bert transmission
Thin moly driveshaft
Spare parts
Springs – many
Shocks – one or two
Front lower control arms – many
Tie-rods, etc. - many
Drive shaft
Beadlock wheel
9-inch floater, lightweight (gun drilled, 31-spline axles)
Parts needed to complete the car
Alcohol carb
Doors and quarters
Seat belts
New tires and fuel
Battery
Open style race car trailer was professionally built in 1996 and has a double tire rack. Overall length is maybe 18-20 feet.
Complete package deal a steal at $13,500
Contact Les at 636-346-9950 or modified3h@yahoo.com
Multiple feature winner, raced less than 100 nights. Engine is a solid long-rod, 400 block Chevrolet with balanced components.
Currently setup as a 2-link with long panhard bar and Harris spring torque link.
Pro Comp lightweight glow gauge pack (Oil Press. Fuel Press. Water Temp)
Quick Car mini Brake Bias gauges
Auto Meter 10,000 RPM memory tach
Wilwood composite pedals and master cylinders for brake and clutch
Lightweight front spring pockets and jacker bolts
32 gallon fuel cell with can
Aeroquip StarLite fuel line (both source and return) with Aeroquip fittings
Howe steering quickener
Performance Friction brake pads (small metric size front and rear)
31 spline 9" Ford floater rear-end
Big GM front spindles
5 x 5 bolt pattern front and rear
AFCO springs and shocks
Light aluminum radiator
Bumpers and Nerf bars are used but not all bent up
Engine components (needs freshened)
Long rod, 400 block Chevrolet
World Products iron heads
Victor Jr tall intake
Fluidyne balancer
KSE tandem fuel/ps pump
Drive train
529 rear gears
Bert transmission
Thin moly driveshaft
Spare parts
Springs – many
Shocks – one or two
Front lower control arms – many
Tie-rods, etc. - many
Drive shaft
Beadlock wheel
9-inch floater, lightweight (gun drilled, 31-spline axles)
Parts needed to complete the car
Alcohol carb
Doors and quarters
Seat belts
New tires and fuel
Battery
Open style race car trailer was professionally built in 1996 and has a double tire rack. Overall length is maybe 18-20 feet.
Complete package deal a steal at $13,500
Contact Les at 636-346-9950 or modified3h@yahoo.com
