Free up lost Horse Power and increase corner speeds with Low Drag Hub Kits from SCP. It’s a difference you can FEEL! Our complete kits feature a precision bearing spacer, low drag seal, and R.E.M. finished low drag bearings. Kits are currently available for Wide-5, Pinto Spindle and 5x5 GN Rear Hubs.
• Bearing spacers are used to distribute the thrust load between both bearings, allowing the hub to roll more freely in the corners. They also prevent the typical over tightening of wheel bearings, reducing drag and lowering bearing temperatures.
• Our Low Drag hub seals have less than 1 in/lb of resistance
• Dirt late model, modified and sportsman cars wheel bearing are put under a constant thrust load. Our R.E.M. finished bearings provide the lowest rolling resistance when a thrust (side) load is applied.
Complete Kits start at $105 per wheel and feature: (1) bearing spacer, (1) low drag seal and (2) R.E.M. finished bearings. Purchase (4) kits and SAVE $$$$$$ Call for details! Individual parts are available purchase.
SCP also offers an in house precision setup service for the guys that don’t want to set up their spacers themselves. We will set your bearing spacer, grease the bearings and install the low drag deal for $30 a wheel. All we need from you is your hubs. Hubs must be clean and degreased.
Call Stephen at SCP for further details: (636) 677-1320
• Bearing spacers are used to distribute the thrust load between both bearings, allowing the hub to roll more freely in the corners. They also prevent the typical over tightening of wheel bearings, reducing drag and lowering bearing temperatures.
• Our Low Drag hub seals have less than 1 in/lb of resistance
• Dirt late model, modified and sportsman cars wheel bearing are put under a constant thrust load. Our R.E.M. finished bearings provide the lowest rolling resistance when a thrust (side) load is applied.
Complete Kits start at $105 per wheel and feature: (1) bearing spacer, (1) low drag seal and (2) R.E.M. finished bearings. Purchase (4) kits and SAVE $$$$$$ Call for details! Individual parts are available purchase.
SCP also offers an in house precision setup service for the guys that don’t want to set up their spacers themselves. We will set your bearing spacer, grease the bearings and install the low drag deal for $30 a wheel. All we need from you is your hubs. Hubs must be clean and degreased.
Call Stephen at SCP for further details: (636) 677-1320
