smaldirt28
Well-Known Member
I got a friend that is looking for a 454. He prefers a complete motor that can be built. Please let me know what you have, a price, and a location. Thank you all in advance.
Tom
Tom
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Looking for a 454 big block.....
- Thread starter smaldirt28
- Start date
smaldirt28
Well-Known Member
^^^^^^^^^^^^^^^^^
B.B. Chevy
Tommy, I know he is looking for a complete, but let me tell ya what I have. I have a Std. bore 454 2-bolt block, real clean, I have 2 sets of +.030 pistons for it. 1 set is Brand New, Speed Pro w/ a .340 dome. The other set are KB's flat tops. 1 big valve releif for the intake valve. Used 1 season in a boat. New Moly rings for both. I have a Brand New Elgin crank w/Clevite 77 brgs., It would need to be polished and balanced. A bare set of heads. (Open chamber) Chrome T.Cover., etc..PM me an offer if your interested..Thanks!!!
Tommy, I know he is looking for a complete, but let me tell ya what I have. I have a Std. bore 454 2-bolt block, real clean, I have 2 sets of +.030 pistons for it. 1 set is Brand New, Speed Pro w/ a .340 dome. The other set are KB's flat tops. 1 big valve releif for the intake valve. Used 1 season in a boat. New Moly rings for both. I have a Brand New Elgin crank w/Clevite 77 brgs., It would need to be polished and balanced. A bare set of heads. (Open chamber) Chrome T.Cover., etc..PM me an offer if your interested..Thanks!!!
smaldirt28
Well-Known Member
Tommy, I know he is looking for a complete, but let me tell ya what I have. I have a Std. bore 454 2-bolt block, real clean, I have 2 sets of +.030 pistons for it. 1 set is Brand New, Speed Pro w/ a .340 dome. The other set are KB's flat tops. 1 big valve releif for the intake valve. Used 1 season in a boat. New Moly rings for both. I have a Brand New Elgin crank w/Clevite 77 brgs., It would need to be polished and balanced. A bare set of heads. (Open chamber) Chrome T.Cover., etc..PM me an offer if your interested..Thanks!!!
Check your PM's.....Thanks.
Tom
smaldirt28
Well-Known Member
^^^^^^^^^^^^^^^^^^^^^^
patternmakerbob
Member
trade for small block?
Here's what I have. It is all listed on the previous thread.
Thanks,
Bob
http://www.stlracing.com/forums/showthread.php?t=84662
Here's what I have. It is all listed on the previous thread.
Thanks,
Bob
http://www.stlracing.com/forums/showthread.php?t=84662
smaldirt28
Well-Known Member
^^^^^^^^^^^^^^^^^^^^^^
