Looking for double Hump 461 Heads or 2.02"x1.60" heads

heads

I have a set of 034bowties. I don't know if they are allowed for what you are doing or not, but they are better than the 461 heads. They have 2.02x1.60 valves,screw in studs, guide plates. The runners are 184 ccintake. The old GM heads average 155 in stock form. They flow around 220cfm at .500. The old heads are around 210. The set I have are angle pluged and no port work. Combustion chambers are 68cc. The set I have were used for one season and then sat in storage for about 6 years. Light surface rust. I would hot tank them and check the springs for the cam you use. Other than that they are good to go. I need $550 for the pair. Give me a call if you are interested. 573-265-6224. Cash
 
I have a set of 461's Also a set of 882's Sent you a pm. Also have a set of World Product heads which i ran on my sportsman. Little more expensive but those are a much better heads. $500 for those
 
You must log in or register to reply here.




Back
Top