Selling everything so I have a ton of spare parts for a modified or stock car, if you don't see what you need, just ask. I'll provide details on anything you are interested in.
68-72 Chevelle lowers multiple pairs, sold only in pairs
Afco springs (fronts, rears, pull bars and some metric springs also)
Bert trasmission (magnesium, not ball spline, 30 nights old)
Aluminum Muncie transmissions (2)
Double hump heads (461) large valves, small screw-in studs with guide plates, ported
Headers for a modified
Scales by LongAcre with printer
Light weight, 9" Ford Floater 60" wide with 31 spline gun-drilled axles and all brackets for swing arm mounts, pull-rod mount, panhard mount, etc.
1 set of tubular uppers-fits 68-72 Chevelle frames
1 set of tall spindles w/rotors & studs 4 3/4" bp fits 68-72 Chevelle & reamed for Chrysler upper (works great as a combination with the uppers)
3rd member (can't recall if its 514 or 529)
377 KB 119 pistons, X-Rods, ARP rod bolts, balanced assembly with Sealed Power rings
Fiberglass roof, white, no cracks
Aluminum water pump-new
Spindles, tie-rods, steering linkage, idler arms, rotors, etc.
New Crower roller lifters (66200)
Crane 1.6 aluminum roller rockers
Ram 3-disc mini clutch
New 1-wire alternator (Mega Torque 7127)
New Moroso lighted tire gauge 0-15#
New SBC oil pump Perfect Circle 601-1047
Lead bars and mounting brackets
Bead breaker
Wheel spacers
Mud scraper
Fuel funnel
Cast Chevy bell housing
SBC valve covers
Stock Chevy starters
Stock master cylinder 1731
Stock power steering pump
Too much more to list, all located in Fenton, MO. For details on anything, contact me at modified3h at yahoo dot com
68-72 Chevelle lowers multiple pairs, sold only in pairs
Afco springs (fronts, rears, pull bars and some metric springs also)
Bert trasmission (magnesium, not ball spline, 30 nights old)
Aluminum Muncie transmissions (2)
Double hump heads (461) large valves, small screw-in studs with guide plates, ported
Headers for a modified
Scales by LongAcre with printer
Light weight, 9" Ford Floater 60" wide with 31 spline gun-drilled axles and all brackets for swing arm mounts, pull-rod mount, panhard mount, etc.
1 set of tubular uppers-fits 68-72 Chevelle frames
1 set of tall spindles w/rotors & studs 4 3/4" bp fits 68-72 Chevelle & reamed for Chrysler upper (works great as a combination with the uppers)
3rd member (can't recall if its 514 or 529)
377 KB 119 pistons, X-Rods, ARP rod bolts, balanced assembly with Sealed Power rings
Fiberglass roof, white, no cracks
Aluminum water pump-new
Spindles, tie-rods, steering linkage, idler arms, rotors, etc.
New Crower roller lifters (66200)
Crane 1.6 aluminum roller rockers
Ram 3-disc mini clutch
New 1-wire alternator (Mega Torque 7127)
New Moroso lighted tire gauge 0-15#
New SBC oil pump Perfect Circle 601-1047
Lead bars and mounting brackets
Bead breaker
Wheel spacers
Mud scraper
Fuel funnel
Cast Chevy bell housing
SBC valve covers
Stock Chevy starters
Stock master cylinder 1731
Stock power steering pump
Too much more to list, all located in Fenton, MO. For details on anything, contact me at modified3h at yahoo dot com