Monte Carlo Metric Street Stock--New

Racelvr72

Racelvr72

Member
I am listing this for Bill. Please contact him directly

Street Stock Built Off From A 1986 Monte Carlo, Car Is 95% Complete And Could Be Ready With A Weekends Worth Of Effort!

-NEW PERFORMACE BODIES NOSE AND TAIL PIECES
-NEW FIVE STAR STEEL DOORS
-NEW US BRAKE REAR ROTORS
-6 NEW AERO WHEELS--10" (2 Are Bead Locks)
-NEW REAR WEIGHT JACKS
-NEW AGR "NASCAR" STYLE STEERING BOX
-NEW WINDOW NET
-NEW DRAG LINK, IDLER ARM AND BALL JOINTS
-NEW SOLID FRONT CONTROL ARM BUSHINGS
-NEW OEM UPPER CONTROL ARMS
-NEW AFCO "HIDDEN" (part #20191) FRONT WEIGHT JACKS
-NEW AFCO GAUGES W/WARNING LIGHTS
-AFTERMARKET BOLT-IN RACING CROSSMEMBER
-NEW ALUMINUM TWO LEVER SHIFTER
-NEW RACING GAS PEDAL
-NEW OVAL CRAFT ALUMINUM SEAT W/LEG SUPPORTS AND HEAD REST
-ALL NEW BRAKE LINES, HOSES, AND FITTINGS
-NEW RJS SEAT BELTS
-NEW AFCO 2 SWITCH PANLE W/LIGHTS
-NEW AFCO STEERING QUICKNER
-NEW SWEET ALUMINUM STEERING WHEEL
-NEW SWEET SPLINED QUICK RELEASE HUB
-AFCO 32 GALLON FUEL CELL W/NEW FOAM
-NEW WILWOOD HANGING BRAKE PEDAL ASSEMBLY
-US BRAKE OVERSIZED REAR BRAKE CALIPERS
-NEW OEM FRONT BRAKE CALIPERS
-AFCOILS
-NEW REMOTE BRAKE ADJUSTER
-NEW BILL WEST ENT. 9" FLOATER REAR END W/AXLES
-NEW AFCO REAR HUBS
-NEW AFCO DOUBLE PASS RADIATOR
-NEW BATTERY
-NEW RACING HEAVY GAUGE BATTERY CABLE
-AEROQUIP FUEL LINE

**CHASSIS FEATURES A PROFESSIONALLY WELDED ROLL CAGE AND A "CORRECTED" FRONT SUSPENSION GEOMETRY USING IMPALA SPINDLES, ADJUSTED ANTI-DIVE, AND ROLL CENTER RAISING BALL JOINTS

HEAR IT RUN!!!

ALL NEW 355 C.I. 11.5 TO 1 SBC. ENGINE FEATURES ALL NEW COMPONENTS INCLUDING DART IRON EAGLE HEADS, FLOW TECH HEADERS, SCAT RODS, NEW GM CAST CRANK BALANCED AND POLISHED BY JR MOTORSPORTS, TRW FORGED PISTONS, STEWART WATER PUMP, COMP CAM (4/7 SWAP), COMP ROLLER TIP ROCKERS, CARTER FUEL PUMP, COMP GUIDE PLATES, 8 QT. RACING OIL PAN, MOROSO ALUMINUM VALVE COVERS, FEDERAL MOGUL RACE BEARINGS, FEL PRO GASKETS, 4 BOLT MAIN CAPS, ARP HEAD AND MAIN BOLTS, AND SCOTT PLUG WIRES.

DRIVELINE COMPONENTS FEATURE A TILTON MULTI-DISC CLUTCH, QUARTER MASTER STARTER AND HYDRAULIC THROWOUT BEARING, QUICK TIME LW BELLHOUSING, AND A MUNCIE 4 SPEED ALUMINUM TRANSMISSION.

ALL THAT IS NEEDED TO GO RACING IS A GEAR, DRIVESHAFT, AND A WEEKEND OF LABOR.

NICELY BUILT CAR, MUST SEE TO APPRECIATE THE EFFORT THAT WENT INTO THIS PROJECT!

WILL SELL COMPLETE, ROLLING, OR ALMOST ANYWHERE IN BETWEEN. PRICING SUBJECT TO HOW MUCH YOU WANT TO BUY.

COMPLETE CAR W/SPARE SUSPENSION AND BODY PIECES ASKING PRICE: $8000.00

CAR LOCATED NEAR EVANSVILLE IN.

BILL WORKMAN 812 457 4771
bdub91@hotmail.com
 
Price without motor and trans would be $5500.00. That would include everything street stock related in my shop as far as spares. I am open to reasonable offer on this car. I would very much like to sell it.

Bill
 
Sir, if you don't agree with my price, that's fine, but please, there is no need to put negative things on my post. If you can purchase the same quality at a better price, please do so, I would do the same.
 
Well i think its just funny that people get on here and sell **** to high..... i can make a complete roller for less than most people will sell them for. just cause its new or its a track champion dont mean its worth it. but goodluck on selling it try posting on racingjunk.com might help with selling it.
 
You must log in or register to reply here.




Back
Top