oks outlaw and support class

[HUTCH95]

OUTLAW RULES

4 stroke over 390 cc..... 375 lb .....less than no min weight
Reed or rotory
2 stroke over 106cc ..... 375 lb...... less than no min weight

Dual carbs add 25 pounds

No min weight piston port

Max cc for 2 stroke 250

Max cc 4 stroke 500

Any supercharged or nos motor must weigh 375 pounds as well.

Dual engine add 50 pounds (375 if flat heads under 500cc or piston ports under 250)

add 25 pounds if supercharged or nos to min. weight.

All wankles must weigh 450

all 4 strokes must run mufflers

All Outlaw drivers must be 18 years old

Kart must not weigh over 250 without driver

30 INCH WEDGE body max. at highest point. ( driver must be able to see clearly to left or right)

 

[HUTCH95]

Limited Rules For OKS

MIN AGE 13 YEARS OLD

FH Briggs 300 pounds 220 cc max

Piston Port 320 pounds 110ccmax

Rotary or reed 2 stroke 375 pounds 105 cc max

Ohv 4 stroke 350 pounds 210 cc max

*weight marked on front of kart next to number for scale person to see clearly.

*no cast flywheels... only billet

*no dual carbs

*mufflers mandatory onall 4 strokes

*no fuel additives and no NOS as well as no superchargers...

*Nothing larger than 360 carbs(.950 + 1.070 no-go tech tools)

*24 in wedge bodies

 

[i refin]

This all sounds interesting Hutch,but where are you going to do this?? The 13hp/clone adult class is a good idea.My concern would be that it will go the same road as the 6.5hp/clones.Wide open cheating,with little tech support.JMO Keep up the good work!
Sumo Awaayyyyyyyyyyyy

 

[HUTCH95]

I am doing it at different tracks. I will be announcing more on the tracks around here. I am talking to a couple tracks. Any tracks or sponsors are more than welcome to give me a call. We do plan to stay on top of this and tech the same with the 13 hp clone. We do not allow any after market cams .

Shawn Hutchinson
(618)889-9286

 

[racing75]

why 25# for duel carbs

 

[HUTCH95]

Let me ask you this.. why do you want to run dual carbs on your outlaw? is it because it is the same speed as the single carb?

 

[HUTCH95]

I am trying to get the limited class in this winter in at DQ. Time will tell.

 

[racing75]

No just trying to compete with the 4 strokes who have 4 times the cc's as a 2 stroke.

 

[mikeatchison123]

sounds good..got a question for the 210cc max 4-strokes do the carbs have to be butterfly style of can we run the sliders as well?

 

[HUTCH95]

you can run the sliders as long as you make the max cc limits.... for your weight.... i am trying to make this simple.

 

[mikeatchison123]

you can run the sliders as long as you make the max cc limits.... for your weight.... i am trying to make this simple.

okay,i run an open clone motoe with stock bore so i should meet the cc limits,count me in for this winter a DQ,
what is are you going to be teching for? becides carb bore?