race88
Active Member
Aluminum stewart water pump $40
4 blade steel fan $15
5 blade steel fan $15
Valve covers $10
Valve cover breathers $5 each
Head studs $60
Victor Jr aluminum intake 2 barrel with cooling system $200
4 inch k&n air cleaners $25 each
Mechanical rebuildable fuel pump used as spare $60
Guage legal 4412 holley spare (worked over) $400
Accutech 3 guage panel oil,water temp, oil pressure $60
Metric spindles $40 each
Steering box metric $100
Tie rods $20 each
Drag link $20
Pitman arm $15
All front end parts $200 or sell them piece by piece
5 X 13 $25 each 375 325 afco
Bilsten shocks (2) 30/30 $75 each
Stock Corvette and ram clutch setups with flywheel 10 1/2 $200 each
5 on 5 wheels $40 non beadlocks and $60-$75 beadlocks each
Hoosier D tires 27.5 and few 26.5 $15 EACH
I have 12 non beadlocks
3" 4
4" 2
2" 6
Beadlocks I have
4" 3
Tires I have
27.5 D 6
26.5 D 2
Prices vary from wheel to wheel and tire to tire etC.
Uppers lf & rf for dirtworks swedge tubes & heims with 3 ball joints etc.. $150 ready to bolt on
Double sided 9 inch pinion plate $15
Chevy distributor coil cap rotor etc... $60
400 balancer small diameter $50
618 267 7299 may take trades for guns, hunting stuff it fishing boats etc..
4 blade steel fan $15
5 blade steel fan $15
Valve covers $10
Valve cover breathers $5 each
Head studs $60
Victor Jr aluminum intake 2 barrel with cooling system $200
4 inch k&n air cleaners $25 each
Mechanical rebuildable fuel pump used as spare $60
Guage legal 4412 holley spare (worked over) $400
Accutech 3 guage panel oil,water temp, oil pressure $60
Metric spindles $40 each
Steering box metric $100
Tie rods $20 each
Drag link $20
Pitman arm $15
All front end parts $200 or sell them piece by piece
5 X 13 $25 each 375 325 afco
Bilsten shocks (2) 30/30 $75 each
Stock Corvette and ram clutch setups with flywheel 10 1/2 $200 each
5 on 5 wheels $40 non beadlocks and $60-$75 beadlocks each
Hoosier D tires 27.5 and few 26.5 $15 EACH
I have 12 non beadlocks
3" 4
4" 2
2" 6
Beadlocks I have
4" 3
Tires I have
27.5 D 6
26.5 D 2
Prices vary from wheel to wheel and tire to tire etC.
Uppers lf & rf for dirtworks swedge tubes & heims with 3 ball joints etc.. $150 ready to bolt on
Double sided 9 inch pinion plate $15
Chevy distributor coil cap rotor etc... $60
400 balancer small diameter $50
618 267 7299 may take trades for guns, hunting stuff it fishing boats etc..