Its hooked up and ready for you to come check it out. Runs using computer, tape, or
manually. 1,500$ Includes 60 Quick Change #30s with attached cutters(some shown), a
vise, and tool cabinet.
This mill was taken out of service when a local manufacturer moved its machining
operations to their NY plant.
mdl KMB-1-S
serial KS-8022060, K-8020041
208/115 vac
Diagram 704-0001-085
CNC KMB-1 CONTROLLER W/JAVELIN BWM9C Monitor
specs I found on-line:
X-Axis Travel Bed: 21'' - 25''
Y-Axis Travel Bed: 10'' - 15''
Z-Axis Travel Bed: 16'' - 20''
KNEE TRAVEL: 15-1/2"
WEIGHT CAP.: 500 LB
SPINDLE MOTOR: 2.5 HP AC VARIABLE SPEED
SPINDLE SPEEDS: 150-3600 RPM
DIM: 88" X 100" X 65"
WEIGHT: 4,000 LBS
# Taper: Universal Kwik-Switch #200 (Quick Change)
# Spindle Power: 2 HP
# Spindle Speed: 150-3600 RPM
# Table Size: 49" x 14"
* Raised Area: 38" x 10.5"
* 3 t-slots
# Power Req: 230V - 25A - 60Hz - 3 PH
Some of the included tooling:
Erickson #30 NMTB Quick Change 2-60-207-101 x4
Erickson #30 NMTB Quick Change 2-60-207-104 x3
Erickson #30 NMTB Quick Change 2-60-207-103 x2
Erickson #30 NMTB Quick Change 2-60-207-106 x3
Erickson #30 NMTB Quick Change 2-60-207-107 x1
Erickson #30 NMTB Quick Change 2-60-207-105 x1
No markings x1
Parlec N30-55TAS
Ericksontools 2-05-207-100
many more. Aprox 60 total, each with a cutter.
more pictures available
central florida
for faster response, email ALLPAULCLA at gmail dots com
manually. 1,500$ Includes 60 Quick Change #30s with attached cutters(some shown), a
vise, and tool cabinet.
This mill was taken out of service when a local manufacturer moved its machining
operations to their NY plant.mdl KMB-1-S
serial KS-8022060, K-8020041
208/115 vac
Diagram 704-0001-085
CNC KMB-1 CONTROLLER W/JAVELIN BWM9C Monitor
specs I found on-line:
X-Axis Travel Bed: 21'' - 25''
Y-Axis Travel Bed: 10'' - 15''
Z-Axis Travel Bed: 16'' - 20''
KNEE TRAVEL: 15-1/2"
WEIGHT CAP.: 500 LB
SPINDLE MOTOR: 2.5 HP AC VARIABLE SPEED
SPINDLE SPEEDS: 150-3600 RPM
DIM: 88" X 100" X 65"
WEIGHT: 4,000 LBS
# Taper: Universal Kwik-Switch #200 (Quick Change)
# Spindle Power: 2 HP
# Spindle Speed: 150-3600 RPM
# Table Size: 49" x 14"
* Raised Area: 38" x 10.5"
* 3 t-slots
# Power Req: 230V - 25A - 60Hz - 3 PH
Some of the included tooling:
Erickson #30 NMTB Quick Change 2-60-207-101 x4
Erickson #30 NMTB Quick Change 2-60-207-104 x3
Erickson #30 NMTB Quick Change 2-60-207-103 x2
Erickson #30 NMTB Quick Change 2-60-207-106 x3
Erickson #30 NMTB Quick Change 2-60-207-107 x1
Erickson #30 NMTB Quick Change 2-60-207-105 x1
No markings x1
Parlec N30-55TAS
Ericksontools 2-05-207-100
many more. Aprox 60 total, each with a cutter.
more pictures available
central florida
for faster response, email ALLPAULCLA at gmail dots com
