Dwarfracer46
Member
PM or call. 573-220-8412. Trade for racing related stuff, I need a decent gas DP 750 holley, 28 spline full spool, over the rail headers for a metric car???, whatcha got?. Paypal or cash. I'll only ship it if it fits a USPS flat rate box. I live near Springfield, MO.
Wheels- 5on5 15X10 bead locks with no rings, 1 Real brand 3off, 1 Aero brand 4 off $20 each
1 remaining- 15X8 5on5 Bassett wheel, painted red, 3off straight and usable $15 each
6- PURE STOCK WHEELS All 5on4 3/4 14" steel wheels 3 with good tires $20 each w/tires, $10 each w/o
2- 5on5-1/2 steel ford truck wheels, with tires that hold air, spoke style, 15X8 $15 each
Solid, homemade, frame mount, engine mounts for SBC, these are to use with the clam shells that mount to the motor $10
6 or 7 GRP Aluminum Rods out of PRO MOD drag race motor, good for decoration or creation for a hot rod, I used one to mount the steering column in my T roadster $5 each
Aluminum water pump for SBC, used, came on a motor I bought $10
Pro-comp 11k RPM tach, works fine, recall does not $30
Deck mounted rear end fill can with lid, like for a modified $10
DUI HEI distributor in a box. broke the upper bushing trying to replace the pickup coil. no module. this one has the o-ringed shaft. comes with new pickup coil, and everything to put it back together. $40
NEW stock vaccum advance pod for an HEI $5
Stock HEI distributor with 7 pin module, GOOD $20
10" Aluminum fuel filter housing, no filter, 6AN in and out. $15
High volume block mount fuel pump for SBC. I think it's a Edelbrock. 1/2NPT in and out. 130GPH, 12-13ish PSI, I also have a regulator w/guage that goes with this pump $40 for all
4 barrell aluminum fuel log 6AN in and 8AN outlets $10
stock sbc exhaust manifolds from a Metric car $10
Good set of straight out Mod headers, solid, 3/8 flanges, 1 3/4 primaries $50
Wheels- 5on5 15X10 bead locks with no rings, 1 Real brand 3off, 1 Aero brand 4 off $20 each
1 remaining- 15X8 5on5 Bassett wheel, painted red, 3off straight and usable $15 each
6- PURE STOCK WHEELS All 5on4 3/4 14" steel wheels 3 with good tires $20 each w/tires, $10 each w/o
2- 5on5-1/2 steel ford truck wheels, with tires that hold air, spoke style, 15X8 $15 each
Solid, homemade, frame mount, engine mounts for SBC, these are to use with the clam shells that mount to the motor $10
6 or 7 GRP Aluminum Rods out of PRO MOD drag race motor, good for decoration or creation for a hot rod, I used one to mount the steering column in my T roadster $5 each
Aluminum water pump for SBC, used, came on a motor I bought $10
Pro-comp 11k RPM tach, works fine, recall does not $30
Deck mounted rear end fill can with lid, like for a modified $10
DUI HEI distributor in a box. broke the upper bushing trying to replace the pickup coil. no module. this one has the o-ringed shaft. comes with new pickup coil, and everything to put it back together. $40
NEW stock vaccum advance pod for an HEI $5
Stock HEI distributor with 7 pin module, GOOD $20
10" Aluminum fuel filter housing, no filter, 6AN in and out. $15
High volume block mount fuel pump for SBC. I think it's a Edelbrock. 1/2NPT in and out. 130GPH, 12-13ish PSI, I also have a regulator w/guage that goes with this pump $40 for all
4 barrell aluminum fuel log 6AN in and 8AN outlets $10
stock sbc exhaust manifolds from a Metric car $10
Good set of straight out Mod headers, solid, 3/8 flanges, 1 3/4 primaries $50
