Fresh bore 30 over Wissota latemodel engine. Only 2 races on engine since fresh (purchased as new). New crank, pistons, and upper end. Has T&D shaft rockers. Engine includes, stiles tri-y headers (for rocket, but I modified my cockpit slightly on my GRT and they fit great)800cfm Aerosol c&s carb with regulator, new mechanical fuel pump, carb spacer, fresh external coil mag, water pump, p/s pump and pulleys, 5 stage drysump system with all lines, pump, breather tank, belt, ring gear, and oil tank. I purchased this engine from B&B this winter as a new engine, and dont have the funds to go racing as much as I would like. It is in the car, and you can hear it run. This is a turn-key engine. Setup for Alky.
-Callis Crank 3.550" (new)
-Dyers Rods Small Journal
-Ross Pistions, Dome 14.4 comp (new)
-T&D shaft rockers (new)
-Brodix spec Wissota head with spec in the runner and ported within the rules
-Brodix Dittman Intake with round top
-Roller cam
-Isky red zone lifters (new)
-Aluminum oil pan
-GM block with steel caps
-Isky tool room valve springs (new)
Oil pump and belt has two nights since fresh. Many of the oil lines are new. Water pump system is a serpentine belt with stage 3 pump and plastic fan.
414-881-5512 Chris or carlsonc12@yahoo.com
$12,250 obo
-Callis Crank 3.550" (new)
-Dyers Rods Small Journal
-Ross Pistions, Dome 14.4 comp (new)
-T&D shaft rockers (new)
-Brodix spec Wissota head with spec in the runner and ported within the rules
-Brodix Dittman Intake with round top
-Roller cam
-Isky red zone lifters (new)
-Aluminum oil pan
-GM block with steel caps
-Isky tool room valve springs (new)
Oil pump and belt has two nights since fresh. Many of the oil lines are new. Water pump system is a serpentine belt with stage 3 pump and plastic fan.
414-881-5512 Chris or carlsonc12@yahoo.com
$12,250 obo
