Eagle modified sold.
Easy edger for hemming sheet metal $500.00 or best offer
Also, , brand new ms3 nose for modified (black), $140 for the nose, and a lot of other parts. call to get pricing. , pino spindals, etc...have any questions give me a call I may have it.
have a simpson bandit helmet custom paint job if you know anyone interested let me know, it is like new $250.00 or best offer
30 1\2 slip roller on roll around stand don't know brand but it is an older one, hand crank $250 also has 4 groves in it for rolling solid stock. has been used for drag car tunnels for floors and tubs also rolls fan shrouds
2 front late model shocks QA1's you can revalve these yourself if need so, 7 inch stroke like new one night on them and all hardware $300
2 rear late model springs-brand new $25 each one is a 250 and the other is 225 I believe
32 gallon fuel cell, stainless steel container, excellent shape, not a dent in it. 100.00
2 modified shocks,
brand new drive shaft for late model will need to measure for exact length, long yolk, new u-joints, $150 firm 35 inches from center to center
have a 980 alcohol carburetor done by Jim Evans $900 also have a C&S belt drive fuel pump $350 with everything, regulator pullies belt spud and if need so I will tell you how to set it up
2 wenches 1 is a super wench used and the other is new one. $50 for new one and $100 for used super wench. the super wench is a 6,000 lb wench and needs a control switch. the new one has everything, forward reverse etc unsure of brand for new one and I believe it is 2,500 lb wench
set of try wy headers for late model, dynotecs, for standard 18 degree chevy powder coated silver $500 and also have a set of modified headers standard 18 degree $300 powder coated silver also. ceramic headers also that are 1 7/8 inch tubes late model headers $200 standard 18 degree. late model headers fit rayburn and grt's. modified headers fit a dirtworks. all of them are like new not a dent in them
call and check if you need something still have an assortment of items
one set of pinto spindals chevelle lowers and hubs and lugnuts and bearings and brake brackets $350 for all of it.
Coleman Floater Hub with bearings all new seal takes a smaller bearing it is machined not cast $150 or best offer they are over $300 new.
aluminum steering wheel 16 or 17 inch blue outer edge in excellent shape $20
also have another floater housing 60 inch center to center with one mitler brother hub on it and a new axel tube for the other side and have axels $250
aluminum radiator for modified $75
monster recall tack brand new goes up to 9,000 rpm paid over $280 will take $200 it has been in one car and was bought brand new
gloves black rcr fit smaller to medium hand, will not fit large hand $20 or best offer
618-570-9521 Tim
Do not always have access to this or e-mail, best to call.
Easy edger for hemming sheet metal $500.00 or best offer
Also, , brand new ms3 nose for modified (black), $140 for the nose, and a lot of other parts. call to get pricing. , pino spindals, etc...have any questions give me a call I may have it.
have a simpson bandit helmet custom paint job if you know anyone interested let me know, it is like new $250.00 or best offer
30 1\2 slip roller on roll around stand don't know brand but it is an older one, hand crank $250 also has 4 groves in it for rolling solid stock. has been used for drag car tunnels for floors and tubs also rolls fan shrouds
2 front late model shocks QA1's you can revalve these yourself if need so, 7 inch stroke like new one night on them and all hardware $300
2 rear late model springs-brand new $25 each one is a 250 and the other is 225 I believe
32 gallon fuel cell, stainless steel container, excellent shape, not a dent in it. 100.00
2 modified shocks,
brand new drive shaft for late model will need to measure for exact length, long yolk, new u-joints, $150 firm 35 inches from center to center
have a 980 alcohol carburetor done by Jim Evans $900 also have a C&S belt drive fuel pump $350 with everything, regulator pullies belt spud and if need so I will tell you how to set it up
2 wenches 1 is a super wench used and the other is new one. $50 for new one and $100 for used super wench. the super wench is a 6,000 lb wench and needs a control switch. the new one has everything, forward reverse etc unsure of brand for new one and I believe it is 2,500 lb wench
set of try wy headers for late model, dynotecs, for standard 18 degree chevy powder coated silver $500 and also have a set of modified headers standard 18 degree $300 powder coated silver also. ceramic headers also that are 1 7/8 inch tubes late model headers $200 standard 18 degree. late model headers fit rayburn and grt's. modified headers fit a dirtworks. all of them are like new not a dent in them
call and check if you need something still have an assortment of items
one set of pinto spindals chevelle lowers and hubs and lugnuts and bearings and brake brackets $350 for all of it.
Coleman Floater Hub with bearings all new seal takes a smaller bearing it is machined not cast $150 or best offer they are over $300 new.
aluminum steering wheel 16 or 17 inch blue outer edge in excellent shape $20
also have another floater housing 60 inch center to center with one mitler brother hub on it and a new axel tube for the other side and have axels $250
aluminum radiator for modified $75
monster recall tack brand new goes up to 9,000 rpm paid over $280 will take $200 it has been in one car and was bought brand new
gloves black rcr fit smaller to medium hand, will not fit large hand $20 or best offer
618-570-9521 Tim
Do not always have access to this or e-mail, best to call.
Attachments
Last edited:
