Jr Dragster Low Pro Lift

Campete Racing

New Member
Jr Dragster Low Pro Lift $350.00 plus Shipping
Hi and thank you for taking the time to look at The Jr Dragster Low Pro lift.
Are you tired of having to lift your Jr and waiting for someone to slide a sawhorse under it wishing they would hurry up well here is the answer.
The Jr Dragster Low Pro Lift is design with the crew chief in mind. Equipped with two Ezlift gas springs to help assist you on the lifting action.
Simple slide it underneath your car release the latch put the extension handle on and pull up on the handle and step forward pushing the handle all the way down it will break over center and stay now raise the safety stand up and lock it in place now you are ready to service your car.
To lower the car release the safety stand pull back on the handle and lower the car down. Now that the stand is lowered latch it down and slide it from underneath the car now its time to go racing
This will no doubt be the crew chiefs favorite tool.
The lift is equipped with two 150 pound Ezlift gas springs to help assist you on the lifting action. With a 300 pound car you will actually be lifting around 50 pounds.
The lift in the closed position is 2 inches high and in the open position its 24 inches high and weights 45 pounds.
In order to keep shipping down I’ve made the lift in two pieces this will require some assemble. You will only have to slide the bottom together and put the bolts thru the holes and attach the top rails snap the gas springs into place. All the hardware will be provided along with pictures and instructions.
You can see more by going to www.cam-peteracing.com
Thanks for looking

Patent Pending Thank you
 

Attachments

Barmac

New Member
Jr Dragster Low Pro Lift $350.00 plus Shipping
Hi and thank you for taking the time to look at The Jr Dragster Low Pro lift.
Are you tired of having to lift your Jr and waiting for someone to slide a sawhorse under it wishing they would hurry up well here is the answer.
The Jr Dragster Low Pro Lift is design with the crew chief in mind. Equipped with two Ezlift gas springs to help assist you on the lifting action.
Simple slide it underneath your car release the latch put the extension handle on and pull up on the handle and step forward pushing the handle all the way down it will break over center and stay now raise the safety stand up and lock it in place now you are ready to service your car.
To lower the car release the safety stand pull back on the handle and lower the car down. Now that the stand is lowered latch it down and slide it from underneath the car now its time to go racing
This will no doubt be the crew chiefs favorite tool.
The lift is equipped with two 150 pound Ezlift gas springs to help assist you on the lifting action. With a 300 pound car you will actually be lifting around 50 pounds.
The lift in the closed position is 2 inches high and in the open position its 24 inches high and weights 45 pounds.
In order to keep shipping down I’ve made the lift in two pieces this will require some assemble. You will only have to slide the bottom together and put the bolts thru the holes and attach the top rails snap the gas springs into place. All the hardware will be provided along with pictures and instructions.
You can see more by going to www.cam-peteracing.com
Thanks for looking


Patent Pending Thank you
 









Top