whitesracing
New Member
Ok Guys ,
Im having troubles.
Fouling plugs like Sh*t
This is what i have done.
Tried A/C R44 TS / R45 TS ....... Autolites- #26 FOULED them as soon as I Fired motor. Set gap at .045
I had battery charger on to make sure i had a hot battery.
I have a new cable going from battery to motor also have a one from frame to motor.
Checked float it was alittle high , but adjusted it back down to where it just runs out.
RECHECKED TIMING !
I put New plugs in , fired motor. I pulled plugs after it ran a few minutes , ran motor up to around 4500 rpms an shut motor off.Plugs are a Dry black color, the whole tip. I noticed when motor was running looked under and seen Black smoke coming from both sides. The smell , smells like to rich The jets are 72. When motor is running it makes your eyes burn. Fuel pump is stock.so pressure shouldnt be high.
What am i not finding ?
Im having troubles.
Fouling plugs like Sh*t
This is what i have done.
Tried A/C R44 TS / R45 TS ....... Autolites- #26 FOULED them as soon as I Fired motor. Set gap at .045
I had battery charger on to make sure i had a hot battery.
I have a new cable going from battery to motor also have a one from frame to motor.
Checked float it was alittle high , but adjusted it back down to where it just runs out.
RECHECKED TIMING !
I put New plugs in , fired motor. I pulled plugs after it ran a few minutes , ran motor up to around 4500 rpms an shut motor off.Plugs are a Dry black color, the whole tip. I noticed when motor was running looked under and seen Black smoke coming from both sides. The smell , smells like to rich The jets are 72. When motor is running it makes your eyes burn. Fuel pump is stock.so pressure shouldnt be high.
What am i not finding ?