Please look at Racing Junk add #182140089 for complete information
Quick fuel 4150 950 alcohol carb $500
Dart iron eagle platinum 230 heads, girdle $600
Dart single plane intake port matched to eagle heads $350
AFR CNCd 220 Aluminum heads, girdle $1000
World single plane intake port matched for AFR heads $200
Crane Billet pro series roller 104 cam, pro ultralight lifters,Comp pushrods, Harlan Sharp roller rockers 1.6/1.5 $575
Titanium Valves 2.08in 1.6ex with triple springs, retainers, keepers $1,000
(all valve train and parts will fit in either set of heads, installed in Dart heads)
Cloyes Hex adjust timing chain and Cloyes cover $225
ATI Super damper $250
6-Wiseco 14/1 pistons $100
5-Eagle h-beam rods 5.7 standard $50
steel caps center 3 splayed with bolts $75
ARP hardware for all parts
Dart heads ran up to 7,600 rpm on pulling motor and they are stock, no work done ot them. We never ran AFR heads.
New for all this is over $8,000 (Not counting machine work, titanium valves are $1650 new alone)
Asking $5,000 for individual parts (wont seperate cam, lifters, pushrods, rockers)
$4250 TAKES IT ALL, what a deal!!! we are switching to BBC
Call Bill at 1-618-629-2426
Call Shawn at 1-217-725-6316 or email at scsc998@aol.com
Quick fuel 4150 950 alcohol carb $500
Dart iron eagle platinum 230 heads, girdle $600
Dart single plane intake port matched to eagle heads $350
AFR CNCd 220 Aluminum heads, girdle $1000
World single plane intake port matched for AFR heads $200
Crane Billet pro series roller 104 cam, pro ultralight lifters,Comp pushrods, Harlan Sharp roller rockers 1.6/1.5 $575
Titanium Valves 2.08in 1.6ex with triple springs, retainers, keepers $1,000
(all valve train and parts will fit in either set of heads, installed in Dart heads)
Cloyes Hex adjust timing chain and Cloyes cover $225
ATI Super damper $250
6-Wiseco 14/1 pistons $100
5-Eagle h-beam rods 5.7 standard $50
steel caps center 3 splayed with bolts $75
ARP hardware for all parts
Dart heads ran up to 7,600 rpm on pulling motor and they are stock, no work done ot them. We never ran AFR heads.
New for all this is over $8,000 (Not counting machine work, titanium valves are $1650 new alone)
Asking $5,000 for individual parts (wont seperate cam, lifters, pushrods, rockers)
$4250 TAKES IT ALL, what a deal!!! we are switching to BBC
Call Bill at 1-618-629-2426
Call Shawn at 1-217-725-6316 or email at scsc998@aol.com