FunW/Methanol
Member
It's a 350 Chevy that passes all of this:
ENGINES:
1. 362 cubic inch MAXIMUM. Motor to be stock GM to GM, Ford to Ford, etc.
2. Stock production cast iron heads only. No porting or polishing.
3. Stock rocker arms only. No roller tip or roller rocker arms.
4. Screw- in studs & guide plates allowed.
5. After market camshafts are allowed. No rollers.
7. Flat top or dished pistons only. Two valve relief piston allowed.
8. 5.7 Stock appearing rods only. (after market rod bolts okay)
9. Stock crank.
10. Stock style HEI or point distributor & must have stock coil & module.
No super coils, magnetos, or MSD boxes are allowed.
11. Cast iron or aluminum 2 or 4 barrel intakes allowed. No air gap type intakes.
12. Carburetors spacer NOT exceeding 2 inch IN HEIGHT.
13. Mechanical fuel pump in stock location. Stock manual fuel pump. No electric or belt driven pumps.
14. Headers or exhaust manifolds allowed. NO. 180 degree headers.
16. Oil pans need to have ¾ inspection plug on side of oil pan.
17. Any Pure Street car winning 3 features (consecutive or nonconsecutive) in a row
will go through complete inspection, if car does not have inspection plug
in the oil pan then motor will be pulled & tore apart.
ENGINES:
1. 362 cubic inch MAXIMUM. Motor to be stock GM to GM, Ford to Ford, etc.
2. Stock production cast iron heads only. No porting or polishing.
3. Stock rocker arms only. No roller tip or roller rocker arms.
4. Screw- in studs & guide plates allowed.
5. After market camshafts are allowed. No rollers.
6. Must pull 15 inch of vacuum at 1000 RPM'S. Vacuum to be pulled from base of carburetor or intake. Vacuum will be checked after Feature Race. 12- volt hookup for track tack required. All engines must be turned off after vacuum test and must have spot to pull vacuum immediately at time of test.7. Flat top or dished pistons only. Two valve relief piston allowed.
8. 5.7 Stock appearing rods only. (after market rod bolts okay)
9. Stock crank.
10. Stock style HEI or point distributor & must have stock coil & module.
No super coils, magnetos, or MSD boxes are allowed.
11. Cast iron or aluminum 2 or 4 barrel intakes allowed. No air gap type intakes.
12. Carburetors spacer NOT exceeding 2 inch IN HEIGHT.
13. Mechanical fuel pump in stock location. Stock manual fuel pump. No electric or belt driven pumps.
14. Headers or exhaust manifolds allowed. NO. 180 degree headers.
15. Carburetor can be NO larger than Holley 500 CFM 2 barrel & must pass inspection from top side with gauge. (Must be stock venture 1 3/8 inch) Choke horn may be removed.16. Oil pans need to have ¾ inspection plug on side of oil pan.
17. Any Pure Street car winning 3 features (consecutive or nonconsecutive) in a row
will go through complete inspection, if car does not have inspection plug
in the oil pan then motor will be pulled & tore apart.