Search results

This is a UMP/Allied legal 2010 Impressive Chassis, can be bought rolling or as a turn key if you want. It has the best of everything on it, ran very well this year at I-55. Contact Mark Todd or us here at Baldwin Racing Engines for more info.

We have been testing and working our LS dirt modified engine program over the last few years, we are really making great power at a low cost, very drivable, easy change over with plenty of parts now for all types of chassis. We had ours on the dyno yesterday updating some carb stuff since we are...

Here at Baldwin Racing Engines we have a complete machine shop for all your race engine needs, we have just added a state of the art crankshaft balancer, only one like it in the area, we can get you smoothed out like never before, chassis and engine dynoing do make sure we are getting you...

Baldwin Racing Engines will be there with lots of new items and some used things as well, if anyone is coming down to cape this weekend look for the Baldwin Racing Engines banner flying and come over to say hi and we can talk over anything you might be needing done, we will have free hot...

This ad expires in 13 days. IMCA legal 360 short blocks by Baldwin Racing 9.0 Forged Piston,Eagle Crank,Eagle Rod $2,000.00 We are offering these as a new deal, we have so many calls on them I deceided to make a shrt block special on these, they will have a Eagle cast steel std weight...

This ad expires in 13 days. IMCA legal 360 short blocks by Baldwin Racing 9.0 Forged Piston,Eagle Crank,Eagle Rod $2,000.00 We are offering these as a new deal, we have so many calls on them I deceided to make a shrt block special on these, they will have a Eagle cast steel std weight...

This is a brand new assembly that was ordered last week and the customer changed his mind, we went to a smaller stroke. This is a New Eagle steel 4340 3.562 stroke crankshaft, H-Beam 4340 rod, JE or Mahle dome piston .030, file fit rings, clevite H bearings, internally balanced in house to our...

This is a brand new assembly that was ordered last week and the customer changed his mind, we went to a smaller stroke. This is a New Eagle steel 4340 3.562 stroke crankshaft, H-Beam 4340 rod, JE or Mahle dome piston .030, file fit rings, clevite H bearings, internally balanced in house to our...

These block are fresh and ready, they have been cleaned and magnifluxed, honed with derby in mind to size, recleaned and new cam bearings and freeze plugs installed, 1 block is a 1 piece rear seal and 1 is a 2 piece both with come with a crankshaft that is polished and ready for use, I need to...

These are built the same way are 355-362 short blocks are done, we only have 3 blocks in stock right now though, the blocks are checked over, then torque plate honed, new cam bearings and freeze plugs, then we install the new Eagle rotating assembly with a cast steel 3.750 crankshaft, I-beam 5.7...

We finally got castings back in inventory, we have picked up 5 sets of 062 Vortec heads, we have spent hours on the flow bench working on the best combination of valve and performance Serdi valve job, we flow big numbers all through the range that these heads are good to, we have been using and...

We have got the derby engine down pat, we have been perfecting these over the last 5 or 6 years and have come up with a very durable engine, there are things we do with the oiling cicuit and other items that keep you running cool long after the water is gone, we build alot of these and they have...

These are very nice new aluminum valve covers with a billet rail on them, they also have the dirt track vent pipes on the left valve cover, we can sell them for around 110.00 a set, so if you want to dress up your engine a little give me a call and we will get you a set shipped out to you...

We are still building a ton of these,GM blocks seasoned, completely run threw the shop cleaned, magnifluxed, checked for straightness in all locations, torque plate honed to size, new cam bearings and freeze plugs, a new Eagle internally balanced cast steel crankshaft 3.480 stroke, I-beam 5.7...

These short blocks start out as season GM 2 bolt blocks that we check over for cracks and straightness, then we bore to size reclean and install new cam bearings and freeze plugs, the crankshafts have been freshly turned and the rods are reconditioned some sets have ARP bolts some dont,the...

These are seasoned GM blocks that we clean,magnaflux, and then check the line bore for straightness, if everything is good we torque plate hone the block to .030,.040, or .060, then we rewash and install new cam bearings and freeze plug. An Eagle assembly is then installed in the block, the...

These start with a seasoned GM block that we clean,magnaflux, and then check for line bore straightness, then after that all checks ok we torque plate hone blocks to .030,.040, or .060 then reclean, we then install new cam bearings and freeze plugs and a new Eagle assembly, the crankshaft is a...

We sell a ton of these, they are seasoned GM blocks that are cleaned,magnafluxed,checked over for line bore straightness, blocks are then torque plate honed to size .030,.040,.060,, recleaned and new cam bearings and freeze plugs installed. Then we install a new Eagle assembly, its a cast steel...

Racing season will be here before you know it and schedules get tight, book yours now before its to late, we can handle anything you have and will do it right the first time, we have been in this for many years and we take pride in what we do, there's nothing better for an engine builder than to...

If any knows Jason Crumps phone number I need it, thanks Jeff Baldwin